My Cart

XBee ZigBee Pro SMA 5dBi

40 €40.00

Availability: In stock

XBee-PRO ZB embedded RF modules provide cost-effective wireless connectivity to devices in ZigBee mesh networks. Utilizing the ZigBee PRO Feature Set, these modules are interoperable with other ZigBee devices, including devices from other vendors†. Programmable versions of the XBee-PRO ZB module make customizing ZigBee applications easy, even without wireless design expertise. SMA-RP Version.

Note: It includes a 5dBi Antenna.

Performance
RF Data Rate 250 Kbps
Indoor/Urban Range 300 ft. (90 m)
Outdoor/RF Line-of-Sight Range Int’l 5000 ft (1500 m)
Transmit Power Int’l 10 mW (+10 dBm)
Receiver Sensitivity (1% PER) -102 dBm

Features

Adjustable Power Yes
I/O Interface 3.3V CMOS UART, SPI, I2C, PWM, DIO, ADC
Configuration Method API or AT commands, local or over-the-air
Frequency Band 2.4 GHz
Interference Immunity DSSS (Direct Sequence Spread Spectrum)
Serial Data Rate 1200 bps - 1 Mbps
ADC Inputs (4) 10-bit ADC inputs
Digital I/O 10
Operating Temperature
& Humidity
-40° C to +85° C, 0-95% humidity non-condensing

Programmability

Memory 32 KB Flash / 2 KB RAM)
CPU/Clock Speed HCS08 / Up to 50.33 MHz

Networking & Security

Encryption 128-bit AES
Reliable Packet Delivery Retries/Acknowledgments
IDs and Channels PAN ID, 64-bit IEEE MAC, 15 channels

Power Requirements

Supply Voltage 2.7 - 3.6VDC
Transmit Current 205 mA

Receive Current 47 mA

Power-Down Current 3.5 uA @ 25º C

Regulatory Approvals
FCC (USA) Yes
IC (Canada) Yes
ETSI (Europe) Yes
C-TICK (Australia) Yes
TELEC (Japan) Yes

Note: If you are searching for Wireless Sensor Networks devices (motes) you may be interested in our ready to market sensor platform: Waspmote. You can discover the differences between both platforms in the document: Waspmote vs SquidBee.

Qty:
Add to Compare

Description

XBee-PRO ZB embedded RF modules provide cost-effective wireless connectivity to devices in ZigBee mesh networks. Utilizing the ZigBee PRO Feature Set, these modules are interoperable with other ZigBee devices, including devices from other vendors†. Programmable versions of the XBee-PRO ZB module make customizing ZigBee applications easy, even without wireless design expertise. SMA-RP Version.

Note: It includes a 5dBi Antenna.

Performance
RF Data Rate 250 Kbps
Indoor/Urban Range 300 ft. (90 m)
Outdoor/RF Line-of-Sight Range Int’l 5000 ft (1500 m)
Transmit Power Int’l 10 mW (+10 dBm)
Receiver Sensitivity (1% PER) -102 dBm

Features

Adjustable Power Yes
I/O Interface 3.3V CMOS UART, SPI, I2C, PWM, DIO, ADC
Configuration Method API or AT commands, local or over-the-air
Frequency Band 2.4 GHz
Interference Immunity DSSS (Direct Sequence Spread Spectrum)
Serial Data Rate 1200 bps - 1 Mbps
ADC Inputs (4) 10-bit ADC inputs
Digital I/O 10
Operating Temperature
& Humidity
-40° C to +85° C, 0-95% humidity non-condensing

Programmability

Memory 32 KB Flash / 2 KB RAM)
CPU/Clock Speed HCS08 / Up to 50.33 MHz

Networking & Security

Encryption 128-bit AES
Reliable Packet Delivery Retries/Acknowledgments
IDs and Channels PAN ID, 64-bit IEEE MAC, 15 channels

Power Requirements

Supply Voltage 2.7 - 3.6VDC
Transmit Current 205 mA

Receive Current 47 mA

Power-Down Current 3.5 uA @ 25º C

Regulatory Approvals
FCC (USA) Yes
IC (Canada) Yes
ETSI (Europe) Yes
C-TICK (Australia) Yes
TELEC (Japan) Yes

Note: If you are searching for Wireless Sensor Networks devices (motes) you may be interested in our ready to market sensor platform: Waspmote. You can discover the differences between both platforms in the document: Waspmote vs SquidBee.

Related Tutorials

The Arduino XBee shield allows your Arduino board to communicate wirelessly using Zigbee. It was developed in collaboration with Arduino. This documentation describes the use of the shield with the XBee module.

It is also compatible with Raspberry Pi using the Raspberry Pi to Arduino shields connection bridge.

This tutorial allows the user to turn ON and OFF a RGB LED with different colors depending on data sent by XBee gateway.

This project can be developed with Arduino or Intel Galileo. It is also compatible with Raspberry Pi using the Raspberry Pi to Arduino shields connection bridge.

This tutorial allows the user to measure the amount light in a room and print it in a graph. This data is sent to a XBee gateway.

This project can be developed with Arduino or Intel Galileo. It is also compatible with Raspberry Pi using the Raspberry Pi to Arduino shields connection bridge.

This tutorial allows the user to set a password key and if it is correct, a LED and a Buzzer will sound printing a message in the LCD.

This project can be developed with Arduino or Intel Galileo. It is also compatible with Raspberry Pi using the Raspberry Pi to Arduino shields connection bridge.

This tutorial allows the user to move a servo to different degrees depending on the data sent by the XBee gateway.

This project can be developed with Arduino or Intel Galileo. It is also compatible with Raspberry Pi using the Raspberry Pi to Arduino shields connection bridge.

The Multiprotocol Radio Shield is an interconnection shield for Arduino, and was designed to connect two communication modules at the same time. This that means a lot of possibilities and applications can be made using the cooking-hacks modules.

The Multiprotocol Radio Shield includes the SPI bus connections that allows the use of the RS-485 and CAN Bus modules, but also is compatible with the rest of the cooking-hacks modules as RFID, XBee and Bluetooth.

If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.

Know more at:

Get the Starter Kits at: