The Xadow - Edison Kit is based on the IntelĀ® Edison which is designed to lower the barriers to entry for anyone prototyping and producing IoT and wearable computing products. It features high performance and low power consumption, which makes your project small and portable, especially suitable for wearable projects. Xadow - Edison Kit includes a Xadow - Edison main board which contains two Xadow-compatible interfaces, one SD interface, one Programmer interface and one Battery interface, a Xadow - Edison Programmer, Xadow - Edison SD. With Xadow - Edison you will be able to use many Xadow modules via standard Xadow interface. Ā Features: Ā Part List Xadow - Edison Ā Ā Ā Ā Ā x1 Xadow - Edison Programmer x1 Xadow - Edison SD Ā Ā Ā x1 FPC Cable;12P-0.5-50mm Ā Ā x1 FPC Cable;20P-0.5-50mm Ā Ā x1 Design for IntelĀ® Edison. USB power supply(4.75~5.25V). Xadow-compatible interfaces. SD card connector. USB to device UART bridge with USB micro Type-B connector. USB OTG with USB Micro Type-AB connector. Battery charger. Power/sleep/Firmware recovery button input Ā Specification: USB Power supply: 4.75V ~ 5.25V 2 standard Xadow interface 1 SD card connector. 1 USB micro Type-B connector 1 USB Micro Type-AB connector 1 Battery interface 1 button for Power/sleep; 1 button for Firmware recovery Dimensions 30.0 Ć 40.0 Ć 7.0 mm Operating temperature 32 to 104Ā°F (0 to 40Ā°C) Documents Please visit our wiki page for more info about this product. It will be appreciated if you can help us improve the documents, add more demo code or tutorials. For technical support, please post your questions to our forum
If you are interested in Internet of Things (IoT) or M2M projects check our open
source sensor platform Waspmote
which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.
Know more at:
Get the Starter Kits at: