My Cart

WIZnet Serial-to-Ethernet Gateway - WIZ110SR

29.95 €29.95

Availability: Retired

SPECIAL OFFER WHILE STOCKS LAST!!

The WIZ110SR is a gateway module that converts RS-232 protocol into TCP/IP. It enables remote gauging, managing and control of TCP/IP devices through an RS-232 serial interface. In other words, WIZ110SR is a protocol converter that transmits the data sent by serial equipment as TCP/IP data type and converts back the TCP/IP data received through the network into serial data to transmit back to the equipment.

The main components of the WIZ110SR are a WIZnet W5100 embedded ethernet controller chip and an 8051 complaint MCU. Also included on the board are DB9 and RJ45 connectors and a 5.5x2.1mm barrel jack. To power the board, a 5V power adapter is required.

Features:

  • WIZnet W5100 Hardwired TCP/IP Embedded Ethernet Controller
    • Supports: TCP, UDP, ICMP, IPv4 ARP, IGMP, PPPoE, Ethernet
    • 10BaseT/100BaseTX Ethernet PHY embedded
  • GC89L591A0-MQ44I (fast 80C52 compatible) MCU
    • internal 62K Flash, 16K SRAM, 2K EEPROM
  • Simple configuration over serial interface
  • Supports password for security
  • 10/100 Ethernet Interface and max 230kbps Serial Interface
  • 5VDC input voltage
    • Center-positive 5.5x2.1mm barrel connector
  • Under 180mA current consumption

Dimensions:

  • Board: 75x45 mm (2.95x1.77 inches)

Documents:



Description

SPECIAL OFFER WHILE STOCKS LAST!!

The WIZ110SR is a gateway module that converts RS-232 protocol into TCP/IP. It enables remote gauging, managing and control of TCP/IP devices through an RS-232 serial interface. In other words, WIZ110SR is a protocol converter that transmits the data sent by serial equipment as TCP/IP data type and converts back the TCP/IP data received through the network into serial data to transmit back to the equipment.

The main components of the WIZ110SR are a WIZnet W5100 embedded ethernet controller chip and an 8051 complaint MCU. Also included on the board are DB9 and RJ45 connectors and a 5.5x2.1mm barrel jack. To power the board, a 5V power adapter is required.

Features:

  • WIZnet W5100 Hardwired TCP/IP Embedded Ethernet Controller
    • Supports: TCP, UDP, ICMP, IPv4 ARP, IGMP, PPPoE, Ethernet
    • 10BaseT/100BaseTX Ethernet PHY embedded
  • GC89L591A0-MQ44I (fast 80C52 compatible) MCU
    • internal 62K Flash, 16K SRAM, 2K EEPROM
  • Simple configuration over serial interface
  • Supports password for security
  • 10/100 Ethernet Interface and max 230kbps Serial Interface
  • 5VDC input voltage
    • Center-positive 5.5x2.1mm barrel connector
  • Under 180mA current consumption

Dimensions:

  • Board: 75x45 mm (2.95x1.77 inches)

Documents:

If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.

Know more at:

Get the Starter Kits at: