My Cart

Wifi Shield

64 €64.00

Availability: On Demand

This Wifi Shield utilizes a RN171 wifi module to provide your Arduino/Seeeduino with serial Ethernet's function. It only takes two pins to hook your device up to 802.11b/g wireless networks with this shield. It features an independent antenna which can cover a wider range and transmit stronger signals.

Qty:
Add to Compare

Description

This Wifi Shield utilizes a RN171 wifi module to provide your Arduino/Seeeduino with serial Ethernet's function. It only takes two pins to hook your device up to 802.11b/g wireless networks with this shield. It features an independent antenna which can cover a wider range and transmit stronger signals. With supports for common TCP, UDP and FTP communication protocols, this Wifi Shield can meet needs of most wireless network projects, like smart home networks, robot controls or personal weather stations,etc. We prepared an easy and convenient command set for this shield so that you can use neat and concise code to run the function.

Features
  • Arduino, Seeeduino, Arduino Mega and Seeeduino Mega compatible
  • Host Data Rate up to 1 Mbps for UART, 2 Mbps over SPI slave
  • UART serial port of RN171 on the Shield can be connected to Arduino by jumpers
  • SPI pin of RN171 is just breakout
  • With two Grove connectors, making it easy to connect I2C and digital IO Grove modules to Arduino
  • Secure WiFi authentication WEP-128, WPA-PSK (TKIP), WPA2-PSK (AES)
  • Built-in networking applications: DHCP client, DNS client, ARP, ICMP ping, FTP, TELNET, HTTP, UDP, TCP

Related Tutorials

The current tutorial explains how to take the most of the Galileo board by using on it the Arduino and Raspberry Pi shields and modules designed by Cooking Hacks

Galileo comes with a single-core 32-bit, 400MHz Quark SoC X1000 processor, supports 3.3 or 5 volt shields and has an Ethernet and USB port. Compatible with Windows, Mac OS and Linux, the software of Galileo also has support for the Arduino shield ecosystem.

In this tutorial we are going to introduce the use of Arduino and Raspberry Pi with WiFi. We will use the WiFi Module Roving RN-171

This module fits in the XBee socket of our Communication Shield and allows to connect your Arduino shield to a WiFi network and also fits in the Raspberry Pi to Arduino shields Connection Bridge.

If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.

Know more at:

Get the Starter Kits at: