My Cart

Wifi module for Arduino Roving RN-XVee - XBee compatible [XBee Socket]

40 €40.00

Availability: Back Order

The Roving RN-XVee WiFi module allows you to connect your shield to a WiFi network. This module fits in the XBee socket of our Communication Shield.

This product is compatible with Arduino and Raspberry Pi.

Qty:
Add to Compare

Description

The RN-XV module by Roving Networks is a certified Wi-Fi solution especially designed for customer who want to migrate their existing 802.15.4 architecture to a standard TCP/IP based platform without having to redesign their existing hardware.

The RN-XV module is based upon Roving Networks' robust RN-171 Wi-Fi module and incorporates 802.11 b/g radio, 32 bit processor, TCP/IP stack, real-time clock, crypto accelerator, power management unit and analog sensor interface.

The RN-XV module supports infrastructure networking for worldwide internet access directly by every node and adhoc connectivity for fully connected point to point networks, unlike many 802.15.4 implementations that need extensive, custom application profiles and additional bridging products. The RN-XVee supports industrial temperature ranges, making it ideal for applications such as sensor networks, industrial or commercial controllers, utility meters and M2M applications.

The module offers additional functionality through its onboard programmable GPIOs (8) and ADCs (3). The ADCs provide 14-bit resolution while the GPIOs can be configured to provide standard functionality or status signaling to a host microcontroller to reduce the need for serial polling between the Wi-Fi module and host microcontroller.

The module is pre-loaded with Roving firmware to simplify integration and minimize development time of your application. In the simplest configuration, the hardware only requires four connections (PWR, TX, RX and GND) to create a wireless data connection. 

Developers can opt to use the RN-174 evaluation board for prototyping and designing their Wi-Fi systems based on the RN-XVee.  The RN-174-K  kit includes the RN-171 module mounted on a carrier board with status LEDs, power regulation, and a serial link to a PC.

Features:

  • Direct Internet connectivity provides internet access to every node
  • Point to point connectivity to every node without the need for custom profiles
  • Based on common 802.15.4 footprint
  • Ultra low power: 4uA sleep mode, 38mA active
  • Onboard TCP/IP stack includes DHCP, UDP, DNS, ARP, ICMP, HTTP client, FTP client and TCP
  • Firmware configurable transmit power: 0dBm to 12dBm
  • Hardware interfaces:TTL UART
  • Host data rate up to 464Kbps over UART
  • Supports Adhoc and infrastructure networking
  • 8 general purpose digital I/O
  • 3 analog sensor inputs
  • Real-time clock for time-stamping, auto-sleep, and auto-wakeup modes
  • Accepts 3.3VDC regulated power supply
  • Configuration over UART or wireless interface (via Telnet) using simple ASCII commands
  • Over the air firmware upgrade (FTP)
  • Secure WiFi authentication: WEP, WPA-TKIP , WPA2-AES

Datasheet
User Manual

Note: If you are searching for Wireless Sensor Networks devices (motes) you may be interested in our ready to market sensor platform: Waspmote. You can discover the differences between both platforms in the document: Waspmote vs SquidBee.

Related Tutorials

In this tutorial we are going to introduce the use of Arduino and Raspberry Pi with WiFi. We will use the WiFi Module Roving RN-171

This module fits in the XBee socket of our Communication Shield and allows to connect your Arduino shield to a WiFi network and also fits in the Raspberry Pi to Arduino shields Connection Bridge.

The Multiprotocol Radio Shield is an interconnection shield for Arduino, and was designed to connect two communication modules at the same time. This that means a lot of possibilities and applications can be made using the cooking-hacks modules.

The Multiprotocol Radio Shield includes the SPI bus connections that allows the use of the RS-485 and CAN Bus modules, but also is compatible with the rest of the cooking-hacks modules as RFID, XBee and Bluetooth.

The current tutorial explains how to take the most of the Galileo board by using on it the Arduino and Raspberry Pi shields and modules designed by Cooking Hacks

Galileo comes with a single-core 32-bit, 400MHz Quark SoC X1000 processor, supports 3.3 or 5 volt shields and has an Ethernet and USB port. Compatible with Windows, Mac OS and Linux, the software of Galileo also has support for the Arduino shield ecosystem.

The e-Health Sensor Shield V2.0 allows Arduino and Raspberry Pi users to perform biometric and medical applications where body monitoring is needed by using 10 different sensors: pulse, oxygen in blood (SPO2), airflow (breathing), body temperature, electrocardiogram (ECG), glucometer, galvanic skin response (GSR - sweating), blood pressure (sphygmomanometer), patient position (accelerometer) and muscle/eletromyography sensor (EMG).

Open Aquarium has been designed to help you to take care of your fish by automating the control and maintenance tasks that take place in the fish tanks and ponds.

Open Aquarium consists of two different and complementary kits: Basic and Aquaponics, and many several extra accessories.

The Open Garden platform consist of three different kits, each ready for a specific kind of growing plant scenario: indoor (houses and greenhouses), outdoor (gardens and fields) and hydroponics (plants in water installations).

The platform allows to control the state of the plants by sensing several parameters.

If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.

Know more at:

Get the Starter Kits at: