My Cart

Waspmote CAN Bus + DB9 cable

175 €175.00

Availability: In stock

CAN is a multi-master broadcast serial bus standard for connecting electronic control units (ECUs). Each node is able to send and receive messages, but not simultaneously. A message consists primarily of an ID (identifier), which represents the priority of the message.

Note: This product includes the new generation Waspmote v1.5. If you have previous versions of sensor boards contact our Sales Department for Waspmote 1.2 units. To know more about the Waspmote versions take a look to this document.

Qty:
Add to Compare

Description

CAN is a multi-master broadcast serial bus standard for connecting electronic control units (ECUs). Each node is able to send and receive messages, but not simultaneously. A message consists primarily of an ID (identifier), which represents the priority of the message. A CAN message that is transmitted with highest priority will succeed and the node transmitting the lower priority message will sense this and back off and wait.

The information is transmitted by two twisted wires that connect all system modules. It is transmitted by voltage difference between the two levels. The high voltage value represents 1 and low 0. Its combination forms an appropriate message.

This pack includes:
- Waspmote board
- CAN Bus Module
- DB9 Cable
- miniUSB cable

You can also get the OBD-II cable separately.

CAN Bus
Standard ISO 11898
Cabling Twisted pair
Connector DB9
Network Topology Multimaster
Speed 125 to 1000 Kbps
Signaling Differential
Voltage Levels 0-5V
Signals Half Duplex

Note: This product includes the new generation Waspmote v1.5. If you have previous versions of sensor boards contact our Sales Department for Waspmote 1.2 units. To know more about the Waspmote versions take a look to this document.

Documentation:
Waspmote Quick Tutorial
Waspmote Site 
Waspmote Technical Guides 
Sensor Boards Technical Guides 
Networking Guides 
Developers Forum 
Videos 
Articles 
50 Applications with Waspmote 
FAQ: Waspmote Vs. Arduino

If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.

Know more at:

Get the Starter Kits at: