The MiCS-5521 is a resistive sensor that responds to a great variety of gases, such as Carbon Monoxide (CO), Hydrocarbons and Volatile Organic Compounds. It’s resistance varies between 1000kΩ and 2kΩ approximately. Like the MiCS-2610, the MiCS-5521 is powered through a 2.5V voltage regulator, with consumption of approximately 32mA. The sensor’s resistance in air, as well as its sensitivity, can vary between different units, so it is recommended to calibrate each one of them before finally inserting them in the application.
Gases: CO, Hydrocarbons, Volatile Organic Compounds *
Measurement range: 30 ~ 400ppm
Air resistance: 100 ~ 1000kΩ
Sensitivity: 1.8 ~ 6 (typically 3, ratio between the resistance at 60ppm and at 200ppm of CO)
Supply voltage: 2.1 ~ 5V DC
Operating temperature: -30 ~ +85ºC
Response time: 30 seconds
Average consumption: 32mA
(*) Chlorinated hydrocarbons, aromatic hydrocarbons, aromatic alcohols, aliphatic alcohols, terpenes, glycols, aldehydes, esters and acids. Detailed list can be found at http://www.libelium.com/downloads/voc-sensors.xls
Note: This product is compatible only with Waspmote 1.5. If you want to use it with Waspmote 1.2 contact our Sales Department. To know more about the Waspmote versions take a look to this document.
Documentation:
Waspmote Quick Tutorial
Waspmote Site
Waspmote Technical Guides
Sensor Boards Technical Guides
Networking Guides
Developers Forum
Videos
Articles
50 Applications with Waspmote
FAQ: Waspmote Vs. Arduino
If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.
Know more at:
Get the Starter Kits at: