My Cart

UNO Compatible Pogobed Kit for Shield Development

43.7 €43.70

Availability: Retired

Description: We know what you're thinking: "That is awesome... what is it?" This is an Arduino shield with pogo pin connectors for each and every GPIO. It's essentially the same rig we use to develop and test shields here at SparkFun! The pogo pins allow you to connect an Arduino shield to the dev board without having to make any solder connections: simply connect the Pogobed Shield to your Arduino, place the test shield on the pins and twist the tabs to lock in the flavor.

Kit Includes:

  • Pogobed PCB
  • Pogobed Support Pieces
  • 30 x Pointed Tip Pogo Pins
  • 6 x Round Nylon Standoffs
  • 12 x Metal Hex Standoffs
  • 6 x 1/4" 4-40 Screws
  • 2 x 3/4" 4-40 Screws
  • 10k Resistor
  • 40-pin Male Breakaway Header
  • Green LED
  • Momentary Push Button

Description

Description: We know what you're thinking: "That is awesome... what is it?" This is an Arduino shield with pogo pin connectors for each and every GPIO. It's essentially the same rig we use to develop and test shields here at SparkFun! The pogo pins allow you to connect an Arduino shield to the dev board without having to make any solder connections: simply connect the Pogobed Shield to your Arduino, place the test shield on the pins and twist the tabs to lock in the flavor.

Kit Includes:

  • Pogobed PCB
  • Pogobed Support Pieces
  • 30 x Pointed Tip Pogo Pins
  • 6 x Round Nylon Standoffs
  • 12 x Metal Hex Standoffs
  • 6 x 1/4" 4-40 Screws
  • 2 x 3/4" 4-40 Screws
  • 10k Resistor
  • 40-pin Male Breakaway Header
  • Green LED
  • Momentary Push Button

If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.

Know more at:

Get the Starter Kits at: