UartSBee v5' is FTDI cable compatible USB to Serial adapter equipped with BEE socket(20pin 2.0mm). The integrated FT232RL can be used for programming or communicating with MCUs. On the other hand, you might connect your PC to various wireless applications via a Bee compatible module. UartSBee provides breakouts for the bit-bang mode pins of FT232RL as well.This Bit-bang mode pins (8 I/O pins) can be used as a replacement for applications involving PC parallel port which is scares now a day. ¬† UartSBee v5 is the Mesh Bee programmer version based on UartSBee v4.¬† ¬† Feature: FTDI Cable compatible. USB 2.0 compatible Serial Interface. 3.3V and 5V compatible I/Os. 3.3V and 5V dual power outputs. Reset button for BEE modules. Bit-Bang mode ready (8 Serial I/Os or as SPI). LEDs for UART and BEE operations.¬† Can program Mesh Bee UartBee V5 has added a button(SW3) that switch on the FT232's UART as the Tx1/Rx1 of Bee socket or the program interface of Mesh Bee module. ¬† Specification? Microprocessor :FT232RL PCB size :3.1cm x 4.1cm Indicators :POWER,Green LED. LEDs for Txd and Rxd Power supply :3.3V and 5V DC Interface :MicroUSB, 2.54mm pitch pin header Adapter socket :XBee compatible 2.0mm pitch female pin header Connectivity :USB Communication Protocol :UART, Bit Bang I/O, SPI ROHS :YES¬† ¬† Application ¬† ¬† Resources¬† Eagle file for UartSBee v5¬† How to program Mesh Bee ¬† Documents Please visit our¬†wiki page¬†for more info about this product. It will be appreciated if¬† you can help us improve the documents, add more demo code or tutorials. For technical support, please post your questions to our¬†forum.
If you are interested in Internet of Things (IoT) or M2M projects check our open
source sensor platform Waspmote
which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.
Know more at:
Get the Starter Kits at: