My Cart

Tri-Track Chassis Kit (no electronics)

247.9 €247.90

Availability: On Demand

Introduction

The Lynxmotion Tri-Track Robot Kit is a robust chassis for your RC or autonomous robot experimentation. The robot is designed for indoor or outdoor use and performs well on many different surfaces. With the addition of the optional Base Rotate an arm or large sensor array can be added, or even a Johnny 5 style robot can be made! The chassis is designed to accept the Bot Board and/or the SSC-32. There's room for the Sabertooth 2 x 5 RC motor controller and an assortment of battery packs with room to spare. The robot is capable of carrying up to a 5lb payload.

The robot chassis is made from ultra-tough laser-cut Lexan structural components, and custom aluminum brackets. By utilizing heavy duty polypropylene and rubber tracks with durable ABS molded sprockets the robot has excellent traction. It includes two 12vdc 50:1 gear head motors.

Specification

  • Length = 10.00"
  • Width = 11.00"
  • Height = 5.00"
  • Ground Clearance = 1.00"
  • Deck Height = 3.00"
  • Deck Dimensions = 7.25" W x 7.88" D
  • Weight = 3.0 lbs (no batteries or electronics)
  • Speed = 17.2 in/sec

Documents

Shipping List

  • Wiring Harness - Battery Connector
  • 2 x Gearhead Motor Connection Wire
  • Laser cut Lexan structural components
  • 2 x Gear Head Motor - 12vdc 50:1 120rpm (6mm shaft)
  • 2 x Track - 2" Wide x 21 links ~23" (single)
  • 6 x Track Sprocket - 6 Link (Pair)
Qty:
Add to Compare

Description

Introduction

The Lynxmotion Tri-Track Robot Kit is a robust chassis for your RC or autonomous robot experimentation. The robot is designed for indoor or outdoor use and performs well on many different surfaces. With the addition of the optional Base Rotate an arm or large sensor array can be added, or even a Johnny 5 style robot can be made! The chassis is designed to accept the Bot Board and/or the SSC-32. There's room for the Sabertooth 2 x 5 RC motor controller and an assortment of battery packs with room to spare. The robot is capable of carrying up to a 5lb payload.

The robot chassis is made from ultra-tough laser-cut Lexan structural components, and custom aluminum brackets. By utilizing heavy duty polypropylene and rubber tracks with durable ABS molded sprockets the robot has excellent traction. It includes two 12vdc 50:1 gear head motors.

Specification

  • Length = 10.00"
  • Width = 11.00"
  • Height = 5.00"
  • Ground Clearance = 1.00"
  • Deck Height = 3.00"
  • Deck Dimensions = 7.25" W x 7.88" D
  • Weight = 3.0 lbs (no batteries or electronics)
  • Speed = 17.2 in/sec

Documents

Shipping List

  • Wiring Harness - Battery Connector
  • 2 x Gearhead Motor Connection Wire
  • Laser cut Lexan structural components
  • 2 x Gear Head Motor - 12vdc 50:1 120rpm (6mm shaft)
  • 2 x Track - 2" Wide x 21 links ~23" (single)
  • 6 x Track Sprocket - 6 Link (Pair)

If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.

Know more at:

Get the Starter Kits at: