My Cart

Synapse RF266PC1 - 2.4GHz (chip antenna)

33.75 €33.75

Availability: Retired

Description: Are you a fan of the XBee form-factor but in need of more power? Try the Synapse module! The Synapse RF266PC1 is an IEEE802.15.4 RF module running the SNAP network operating system that is pin-compatible with sockets already designed in for Digi Internationals XBee and XBee-PRO RF modules. The RF266 also includes an open source software layer that can understand AT commands that you may already be using or you can modify the software to fit your requirements.

This module supports data rates from 250kbps up to 2Mbps and distances of up to 3 miles because of a high gain 22 dBm transmit amp; a built in receive amp provides a -107 dBm receive sensitivity! These small, low-powered, 2.4 GHz transmitter-receiver modules are modest in power consumption as low as 0.37 A. The RF266PC1 comes preloaded with the award-winning Synapse SNAP network operating system. The embedded Python virtual machine makes application programming fast and easy and you can send your code to the module over the air.

Features:

  • 15 GPIO, and up to 4 10-bit A/D inputs
  • One UART port for control or transparent data
  • Low power modes: 0.37 A with internal timer running
  • 128k flash, 56k free for over-the-air uploaded user apps
  • Up to 3 miles LOS range
  • Socket-able or solder-able
  • SNAP Cloud Compatible
  • 250 kbps to 2 Mbps Data Rate
  • 2.4 GHz RF Frequency
  • Spread Spectrum (DSSS) technology
  • Receive Amplifier (10 dBm)
  • Transmit amplifier (20 dBm)
  • Chip antenna

Documents:

Description

Description: Are you a fan of the XBee form-factor but in need of more power? Try the Synapse module! The Synapse RF266PC1 is an IEEE802.15.4 RF module running the SNAP network operating system that is pin-compatible with sockets already designed in for Digi Internationals XBee and XBee-PRO RF modules. The RF266 also includes an open source software layer that can understand AT commands that you may already be using or you can modify the software to fit your requirements.

This module supports data rates from 250kbps up to 2Mbps and distances of up to 3 miles because of a high gain 22 dBm transmit amp; a built in receive amp provides a -107 dBm receive sensitivity! These small, low-powered, 2.4 GHz transmitter-receiver modules are modest in power consumption as low as 0.37 A. The RF266PC1 comes preloaded with the award-winning Synapse SNAP network operating system. The embedded Python virtual machine makes application programming fast and easy and you can send your code to the module over the air.

Features:

  • 15 GPIO, and up to 4 10-bit A/D inputs
  • One UART port for control or transparent data
  • Low power modes: 0.37 A with internal timer running
  • 128k flash, 56k free for over-the-air uploaded user apps
  • Up to 3 miles LOS range
  • Socket-able or solder-able
  • SNAP Cloud Compatible
  • 250 kbps to 2 Mbps Data Rate
  • 2.4 GHz RF Frequency
  • Spread Spectrum (DSSS) technology
  • Receive Amplifier (10 dBm)
  • Transmit amplifier (20 dBm)
  • Chip antenna

Documents:

If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.

Know more at:

Get the Starter Kits at: