My Cart

Stepper Motor - 29 oz.in (200 steps/rev, Threaded Shaft)

29.7 €29.70

Availability: Retired

Description: These steppers have a threaded shaft, which allows them to be used as a linear actuator. As the motor runs, it moves along the shaft at a specific rate of 1cm per 5 full rotations. These are a good choice for linear motion where precision and repeatability are important.

Note: It looks like the datasheet for this stepper may not be accurate. When connecting this motor to a bi-polar driver you'll want to wire it according to the wiring diagram in the documents below.

Features:

  • Step Distance: 0.01mm
  • 2-Phase
  • Rated Voltage: 12V
  • Rated Current: 0.4A/Phase
  • 100mm Long Threaded Shaft (keyed on one end)
  • Holding Torque: 21 N.cm

Documents:

Description

Description: These steppers have a threaded shaft, which allows them to be used as a linear actuator. As the motor runs, it moves along the shaft at a specific rate of 1cm per 5 full rotations. These are a good choice for linear motion where precision and repeatability are important.

Note: It looks like the datasheet for this stepper may not be accurate. When connecting this motor to a bi-polar driver you'll want to wire it according to the wiring diagram in the documents below.

Features:

  • Step Distance: 0.01mm
  • 2-Phase
  • Rated Voltage: 12V
  • Rated Current: 0.4A/Phase
  • 100mm Long Threaded Shaft (keyed on one end)
  • Holding Torque: 21 N.cm

Documents:

If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.

Know more at:

Get the Starter Kits at: