Waspmote is an open source wireless sensor platform specially focused on the implementation of low consumption modes which allows the sensor nodes ("motes") to be completely autonomous, that is battery powered. Lifetime of Waspmote sensor nodes may go from 1 to 5 years depending on the duty cycle and the radio used.
Waspmote is based on a modular architecture. The idea is to integrate only the modules needed in each device optimizing costs. For this reason all the modules (radios, sensor boards, etc) plug in Waspmote through sockets.
This kit includes:
x1 Waspmote ZigBee 3 SMA 2dBi
x1 Waspmote Gateway ZigBee 3 SMA 5 dBi
x1 2300 mAh LiPo Battery
x1 miniUSB Cable
The modules available for integration in Waspmote are categorised in:
- ZigBee 3/802.15.4 modules (2.4GHz, 868MHz, 900MHz). Low and high power.
- GSM - 3G/GPRS Module (Quadband: 850MHz/900MHz/1800MHz/1900MHz)
- Sensor Modules (Sensor boards)
- Storage Module: SD Memory Card
- GPS Module
Note: This product includes the new generation Waspmote v1.5. If you have previous versions of sensor boards contact our Sales Department for Waspmote 1.2 units. To know more about the Waspmote versions take a look to this document.
If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.
Know more at:
Get the Starter Kits at: