Freescaleâ€™s MAG3110 is a small, low-power, digital 3-axis magnetometer. The device can be used in conjunction with a 3-axis accelerometer to produce orientation independent accurate compass heading information. It features a standard I2C serial interface output and smart embedded functions. Itâ€™s also a tiny QFN package which isnâ€™t very easy to play with so here is our easy to use breakout board. This board breaks out all of the pins for the MAG3110 to a standard 0.1" header and also supplies the necessary filtering capacitors so that you can easily use it in your next navigation project.Note: You will need to use a logic level converter if you are using an Arduino Uno or similar 5V logic device. Even if 3.3V is to be supplied to the VDD, an Uno putting out 5V logic can still fry this breakout.Features:1.95V to 3.6V Supply Voltage7-bit I2C address = 0x0EFull Scale Range Â±1000 ?TSensitivity of 0.10 ?TPull Up Resistor JumperDimensions: 13.3 x 14.5 mmDocuments:SchematicEagle FilesDatasheet (MAG3110)Example CodeGitHub (Design Files)Product Video
If you are interested in Internet of Things (IoT) or M2M projects check our open
source sensor platform Waspmote
which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.
Know more at:
Get the Starter Kits at: