My Cart

Sharp GP2Y0A710K Distance Sensor (100-550cm)

24.8 €24.80

Availability: Retired

Introduction

The GP2Y0A710K infrared sensor is a new version of GP2Y0A700K which takes a continuous distance reading and reports the distance as an analog voltage with a distance range of 1m (39.3") to 5.5m (216.5").

The interface is 5-wire JST connector (included with pins) with dual Vcc, dual Gnd, and a single output voltage.

Simply provide power and ground, and read a continuous analog voltage representing distance. A software lookup table can be implemented to translate the voltages to distances.

Documents

Shipping List

  • Sensor
  • Cable

Description

Introduction

The GP2Y0A710K infrared sensor is a new version of GP2Y0A700K which takes a continuous distance reading and reports the distance as an analog voltage with a distance range of 1m (39.3") to 5.5m (216.5").

The interface is 5-wire JST connector (included with pins) with dual Vcc, dual Gnd, and a single output voltage.

Simply provide power and ground, and read a continuous analog voltage representing distance. A software lookup table can be implemented to translate the voltages to distances.

Documents

Shipping List

  • Sensor
  • Cable

If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.

Know more at:

Get the Starter Kits at: