My Cart

Shadow Chassis

12.95 €12.95

Availability: Retired

The Shadow Chassis is a marvelously durable and modular robot platform from RobotZone. The chassis plates and mounts are cut from ABS plastic and utilize the Actobotics 0.77" and 1.50" hub patterns for sensors, controllers, power, etc. Simply snap each panel together and you’ll be able to attach your motors and favorite robotics controller. With the included “snap on” micro-controller mounts, you can attach an Arduino, Raspberry Pi, SparkFun RedBoard, or SparkFun RedBot Mainboard! This kit even has a mounting hole for a standard size servo as well as a 4xAA battery holder with barrel jack termination.Unlike its predecessor, the Shadow Chassis does not require you to use any additional tools. Everything snaps soundly into place!Note: The Shadow Chassis does require assembly. You can find detailed instructions in the Documents section below.Dimensions: 196mm L x 126mm W x 44mm H (53.25mm w/ Nub Caster) Kit Includes:1x Top Chassis Plate1x Bottom Chassis Plate2x Front Motor Mount2x Rear Motor Mount4x Side Strut2x Encoder Mount2x Micro-Controller Mount1x Battery Pack Clip1x Line Follower Mount1x Line Follower Mount Plate1x Nub Caster1x 4xAA Battery HolderDocuments:Assembly GuideRedBot Experiment GuideProduct Video

Description

The Shadow Chassis is a marvelously durable and modular robot platform from RobotZone. The chassis plates and mounts are cut from ABS plastic and utilize the Actobotics 0.77" and 1.50" hub patterns for sensors, controllers, power, etc. Simply snap each panel together and you’ll be able to attach your motors and favorite robotics controller. With the included “snap on” micro-controller mounts, you can attach an Arduino, Raspberry Pi, SparkFun RedBoard, or SparkFun RedBot Mainboard! This kit even has a mounting hole for a standard size servo as well as a 4xAA battery holder with barrel jack termination.Unlike its predecessor, the Shadow Chassis does not require you to use any additional tools. Everything snaps soundly into place!Note: The Shadow Chassis does require assembly. You can find detailed instructions in the Documents section below.Dimensions: 196mm L x 126mm W x 44mm H (53.25mm w/ Nub Caster) Kit Includes:1x Top Chassis Plate1x Bottom Chassis Plate2x Front Motor Mount2x Rear Motor Mount4x Side Strut2x Encoder Mount2x Micro-Controller Mount1x Battery Pack Clip1x Line Follower Mount1x Line Follower Mount Plate1x Nub Caster1x 4xAA Battery HolderDocuments:Assembly GuideRedBot Experiment GuideProduct Video

If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.

Know more at:

Get the Starter Kits at: