My Cart

Seeeduino Cloud - Arduino Yun compatible openWRT controller

49.95 €49.95

Availability: Retired

Introduction : Seeeduino Cloud is a microcontroller board based on Dragino WiFi IoT module HE and ATmega32u4. HE is a high performance, low cost 150M, 2.4G WiFi module which means “core” in Chinese and with an Open Source OpenWrt system inside. Seeeduino Cloud is also an Arduino compatible board, 100% compatible to grove, shield and IDEs(>=1.5.3). Except for the normal interface of Arduino, Seeeduino Cloud has built-in Ethernet and WiFi support, a USB-A port which makes it very suitable for those prototype design that need network connection and mass storage. It is also a good idea to make Seeeduino Cloud to be an IoT gateway.  Features:   Compatible with Arduino Yun   Based on Dragino WiFi IoT module HE   Open Source OpenWrt system inside   Support 2.4Ghz WiFi, 802.11 b/g/n   Support Ethernet   Support USB 2.0   Size:  75.10mm x 53.39mm x 11.50mm / 2.95" x 2.10 x 0.45"   Working temperature:  -20~60°C   Surface colors:  Red   Wiki: http://www.seeedstudio.com/wiki/Seeeduino_Cloud Schematic pdf/jpg: http://www.seeedstudio.com/wiki/File:Seeeduino_Cloud_PDF.pdf Firmware: http://www.seeedstudio.com/wiki/File:Seeed-build--v1.3.4--20140815-1100.zip

Description

Introduction : Seeeduino Cloud is a microcontroller board based on Dragino WiFi IoT module HE and ATmega32u4. HE is a high performance, low cost 150M, 2.4G WiFi module which means “core” in Chinese and with an Open Source OpenWrt system inside. Seeeduino Cloud is also an Arduino compatible board, 100% compatible to grove, shield and IDEs(>=1.5.3). Except for the normal interface of Arduino, Seeeduino Cloud has built-in Ethernet and WiFi support, a USB-A port which makes it very suitable for those prototype design that need network connection and mass storage. It is also a good idea to make Seeeduino Cloud to be an IoT gateway.  Features:   Compatible with Arduino Yun   Based on Dragino WiFi IoT module HE   Open Source OpenWrt system inside   Support 2.4Ghz WiFi, 802.11 b/g/n   Support Ethernet   Support USB 2.0   Size:  75.10mm x 53.39mm x 11.50mm / 2.95" x 2.10 x 0.45"   Working temperature:  -20~60°C   Surface colors:  Red   Wiki: http://www.seeedstudio.com/wiki/Seeeduino_Cloud Schematic pdf/jpg: http://www.seeedstudio.com/wiki/File:Seeeduino_Cloud_PDF.pdf Firmware: http://www.seeedstudio.com/wiki/File:Seeed-build--v1.3.4--20140815-1100.zip

If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.

Know more at:

Get the Starter Kits at: