This is the new-released SD card V4.0 shield. It provides a storage space for your Arduino. Users can read/write SD card via Arduinoās built-in SD library. It supports SD, SDHC and Micro SD cards. It will only occupy the SPI port of your Arduino. Comparing to previous versions, it combines the standard SD slot and the Micro SD slot into a standard one, the included adaptor enables using of Micro SD cards . You can stack on other shields that work with the unused pins. Additionally, the preformed I2C and UART port facilitate your connection with Grove modules. Ā Note: Headers of this product is shipped unsoldered. Ā Features Stand SD card?SDHC card and TF card compatible UART Grove & I2C connection compatible Fully supported SD Library Minimal number of SPI port Truly stackable Specification
Ā Item Min Typical Max Unit Voltage 3.5 5.0 5.5 V Current 0.159 100 200 mA Supported Card Type SD card(<=32G); Micro SD card(<=32G); SDHC card(<=32G) / Dimension 68.7x53.5x19.00 mm Net Weight 14.8 g Ā Ā Documents Please visit ourĀ wikiĀ pageĀ for more info about this product. It will be appreciated if you can help us improve the documents, add more demo code or tutorials. For technical support, please post your questions to ourforum. Ā
If you are interested in Internet of Things (IoT) or M2M projects check our open
source sensor platform Waspmote
which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.
Know more at:
Get the Starter Kits at: