My Cart

Robotic Claw Pan/Tilt Bracket - MKII

29.3 €29.30

Availability: Retired

Description: This is a pan/tilt bracket designed specifically to work with the robotic claw MKII that we sell. It comes with all of the hardware you need to connect it to the claw and even includes the 'tilt' control servo. Panning can be controlled by attaching a medium servo to the bracket milled into the base of the arm; it's the same size servo that fits the robotic claw, you can find it in the related products below).

Note: This does not include the panning servo or the robotic claw MKII, you will need to buy those separately. Check the related products below.

Dimensions: 4" long at full extension, 1 x 2.5" footprint

Documents:

Replaces: ROB-10826

Description

Description: This is a pan/tilt bracket designed specifically to work with the robotic claw MKII that we sell. It comes with all of the hardware you need to connect it to the claw and even includes the 'tilt' control servo. Panning can be controlled by attaching a medium servo to the bracket milled into the base of the arm; it's the same size servo that fits the robotic claw, you can find it in the related products below).

Note: This does not include the panning servo or the robotic claw MKII, you will need to buy those separately. Check the related products below.

Dimensions: 4" long at full extension, 1 x 2.5" footprint

Documents:

Replaces: ROB-10826

If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.

Know more at:

Get the Starter Kits at: