Makeblock Robotic Arm Add-on Pack is a robot pack to expand upon your Makeblock Starter Robot Kit. It contains Ā all the parts to build the robotic arm such as DC Motor-37, Robot Gripper, beams, timing pulleys and hardware.
The robotic arm tank is interesting, nimble, and strong enough. It can be controlled by a IR remote controller , you can use the IR Remote controller to turn the robot in all the directions and pick up a bottle of water in 200ml.
Now, use this pack to build your Robotic Arm Tank!
Expand upon Makeblock Starter Robot Kit to build a Robotic Arm Tank or Robotic Arm Car. All parts of the robotic arm are included. Largest open size of robot gripper is 76mm Motor inside the gripper will stop when it fully open and fully closed
Marerial: Aluminum,Acrylic board Largest open size: 76mm Gripper motor voltage: 12v Gripper motor operating current: ?110mA Gripper motor speed: 600Ā±10%RPM Arm motor voltage: 12v Arm motor speed: 50Ā±RPM
1 x Strong Robot GripperĀ Ā Ā 1 x Beam 0824-64Ā Ā Ā 1 x Beam 0824-80Ā Ā Ā 3 x Beam 0824-96Ā Ā Ā 3 x Beam 0808-168Ā Ā Ā 1 x Timing Pulley 90TĀ Ā Ā 1 x Timing Pulley18TĀ Ā Ā 1 x Timing Belt 123TĀ Ā Ā 3 x Linear Motion Shaft D4x88mmĀ Ā Ā 8 x Shaft Collar 4mmĀ Ā Ā 6 x Plastic Ring 4x7x2mm 3 x Plate 3x6Ā Ā Ā 1 x Flange Bearing 4x8x3mmĀ Ā Ā 1 x DC Motor-37 Bracket BĀ Ā Ā 12 x Headless Set Screw M3x5 Ā Ā Ā 2 x Nylon lock Nut 4mm 4 x Countersu
If you are interested in Internet of Things (IoT) or M2M projects check our open
source sensor platform Waspmote
which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.
Know more at:
Get the Starter Kits at: