My Cart

RGB LED Panel - 16x32

24.95 €24.95

Availability: On Demand

Are you looking to add a lot of color to your project? These large 32x16 RGB LED panels are an awesome place to start. You can create animations, games, or all sorts of other fun displays with them. Yes, you read that right: a 32x16 LED matrix, that’s 512 LEDs on a 7.5" x 3.75" board. On top of all that, thanks to two IDC connectors, and a seamless frame, these panels can be daisy chained together to form even bigger LED displays. These panels require a regulated 3.3-5V supply for power which needs to be able to source a good amount of current – up to 2A in the worst case. Included with each panel is a 0.15" pitch 4-pin polarized connector power cable which is terminated with both a female polarized connector, and a pair of spade terminals. Needless to say, if you are looking for a large, cheap, and easy to use RGB LED matrix you’ve come to the right place.Note: These displays were intended for use with FPGAs and high-speed processors. We’ve found that 16MHz is about the slowest processor that can drive these adequately. If you want to daisy-chain them together, you will need more speed and more RAM.Features:512 RGB LEDs1/8 Scan RateDual IDC Connectors for Daisy Chaining3.3-5V Supply VoltageIncludes:1x 32x16 RGB LED Panel1x 0.15" Pitch 4-pin Power Cable w/ Spade Connectors1x 16-pin (2x8) Ribbon CablesDocuments:RGBMatrixPanel LibraryHookup GuideProduct Video
Qty:
Add to Compare

Description

Are you looking to add a lot of color to your project? These large 32x16 RGB LED panels are an awesome place to start. You can create animations, games, or all sorts of other fun displays with them. Yes, you read that right: a 32x16 LED matrix, that’s 512 LEDs on a 7.5" x 3.75" board. On top of all that, thanks to two IDC connectors, and a seamless frame, these panels can be daisy chained together to form even bigger LED displays. These panels require a regulated 3.3-5V supply for power which needs to be able to source a good amount of current – up to 2A in the worst case. Included with each panel is a 0.15" pitch 4-pin polarized connector power cable which is terminated with both a female polarized connector, and a pair of spade terminals. Needless to say, if you are looking for a large, cheap, and easy to use RGB LED matrix you’ve come to the right place.Note: These displays were intended for use with FPGAs and high-speed processors. We’ve found that 16MHz is about the slowest processor that can drive these adequately. If you want to daisy-chain them together, you will need more speed and more RAM.Features:512 RGB LEDs1/8 Scan RateDual IDC Connectors for Daisy Chaining3.3-5V Supply VoltageIncludes:1x 32x16 RGB LED Panel1x 0.15" Pitch 4-pin Power Cable w/ Spade Connectors1x 16-pin (2x8) Ribbon CablesDocuments:RGBMatrixPanel LibraryHookup GuideProduct Video

If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.

Know more at:

Get the Starter Kits at: