This is the RFduino Dev Kit, a great duo of products in one box to help you get you started with and teach you the basics of RFduino. Inside this kit you will find two RFduino boards, the DIP mainboard and the USB shield. When attached, these two boards will be able to connect to the USB port on your computer and get your code through the Arduino IDE onto the RFduino DIP board.The RFduino is a Bluetooth 4.0 Low Energy BLE RF Module with Built-In ARM Cortex-M0 and RFD22301 SMT module for rapid development and prototyping projects. The RFduino operates at 3V and 18mA (4uA ULP), transmits of a 2.4 GHz band, and offers 128kb of flash memory with 8kb of ram. Via a Bluetooth connection with your iOS device you even run a series of free apps to control various shields through the RFduino DIP board. Meanwhile, on-board the RFduino USB Shield is a 3.3V regulator which can be used to supply power to the RFduino DIP module as well as other shields and possibly the rest of your circuit.With this kit you wonâ€™t need to worry about buying the USB shield separately from the RFduino DIP, itâ€™s all in one box and ready to be used right away!Includes:1x RFduino - DIP1x RFduino - USB ShieldFeatures:Operating Voltage: 3V (Max 3.6V, Low 1.9V)Transmit/Recieve Current: 18mA (4uA ULP)16MHz ARM Cortex-M0 CPU128kb Flash8kb RamBluetooth LE RF Module2.4 GHz BandTransmit Power: 4dbmUSB Shield Max Current: 500mADocuments:DatasheetQuickstart GuideSchematic (RFduino - DIP)Schematic (USB Shield)PCB Layout (RFduino - DIP)PCB Layout (USB Shield)BLE Programming GuideSample CodeiOS AppsProduct Video
If you are interested in Internet of Things (IoT) or M2M projects check our open
source sensor platform Waspmote
which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.
Know more at:
Get the Starter Kits at: