My Cart

    • The product Grove - Temperature&Humidity Sensor Pro has been added to comparison list.

RF Mini RGB Controller

12.15 €12.15

Availability: Retired


This is an ultra thin RGB LED strip remote control set. It consists of an ultra thin and light remote and a minimal receiver. There are 19 modes and 20 static colors pre-stored in the controller. You can easily change mode, speed, color and brightness of either RGB LED strip or mono color LED strip with it. Each channel of the receiver is capable of handling 4A current, driving the peak power it delivers to 144w. Sure a good mate for you to create real LED strip project.

Features
  • Rich color
  • Plenty ready-to-go light effects
  • Speed adjustable
  • Brightness adjustable
Specifications

Dynamic19
Static colors20
PWM control level256levels
Speed grade dynamic mode10levels
Brightness level of static color5levels
working voltageDC 5~24V
Max output current3x4A
Remote frequency433.92 MHz
Remote distance>20mi at open area
Controller Dimension42x12x3(mm)
Remote Dimension85x39x5(mm)
Working temperature-30C~+75C

To pair a remote control with a receiver: Cycle power on the receiver then press and hold the Speed+ and Speed- buttons for 2 seconds.

Description


This is an ultra thin RGB LED strip remote control set. It consists of an ultra thin and light remote and a minimal receiver. There are 19 modes and 20 static colors pre-stored in the controller. You can easily change mode, speed, color and brightness of either RGB LED strip or mono color LED strip with it. Each channel of the receiver is capable of handling 4A current, driving the peak power it delivers to 144w. Sure a good mate for you to create real LED strip project.

Features
  • Rich color
  • Plenty ready-to-go light effects
  • Speed adjustable
  • Brightness adjustable
Specifications

Dynamic19
Static colors20
PWM control level256levels
Speed grade dynamic mode10levels
Brightness level of static color5levels
working voltageDC 5~24V
Max output current3x4A
Remote frequency433.92 MHz
Remote distance>20mi at open area
Controller Dimension42x12x3(mm)
Remote Dimension85x39x5(mm)
Working temperature-30C~+75C

To pair a remote control with a receiver: Cycle power on the receiver then press and hold the Speed+ and Speed- buttons for 2 seconds.

If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.

Know more at:

Get the Starter Kits at: