My Cart

Raspberry Pi B+ AD/DA Expansion Board

10.95 €10.95

Availability: Retired

The DA/AD module is specifically designed for RaspberryPi. It communicated with RaspberryPi through I2C bus. There is a LED light on the board that you can adjust brightness through DA. The module supply 4 ADC channel through header on the left side of module and the thermistor interface. The user can choose according to actual demand and use them. The module is easy to use even you don’t need to write C code. Because the module support wiringPi so you can use shell script to control it. Produce Features?   Use PCF8591T chip   DA/AD in one module   8bit high resolution DA/AD   Compatible with wiringPi   Supply thermistor and photoresistance Port?   Raspberry Pi connection port   Thermistor interface   4 external analog channel   Electric level switch jumper   LED of DA choice jumper   Product Parameters?   Working voltage: 2.5V-6.0V   8-bit successive approximation A/D conversion   Multiplying DAC with one analog output   Analog voltage range from Vss to VDD   4 analog inputs configurable as single ended or differential inputs   Max sampling rate given by I2C-bus speed   ?40°C to +85°C operation   Typical Application?   Supply monitoring   Reference setting   Analog control loop   Datesheet

Description

The DA/AD module is specifically designed for RaspberryPi. It communicated with RaspberryPi through I2C bus. There is a LED light on the board that you can adjust brightness through DA. The module supply 4 ADC channel through header on the left side of module and the thermistor interface. The user can choose according to actual demand and use them. The module is easy to use even you don’t need to write C code. Because the module support wiringPi so you can use shell script to control it. Produce Features?   Use PCF8591T chip   DA/AD in one module   8bit high resolution DA/AD   Compatible with wiringPi   Supply thermistor and photoresistance Port?   Raspberry Pi connection port   Thermistor interface   4 external analog channel   Electric level switch jumper   LED of DA choice jumper   Product Parameters?   Working voltage: 2.5V-6.0V   8-bit successive approximation A/D conversion   Multiplying DAC with one analog output   Analog voltage range from Vss to VDD   4 analog inputs configurable as single ended or differential inputs   Max sampling rate given by I2C-bus speed   ?40°C to +85°C operation   Typical Application?   Supply monitoring   Reference setting   Analog control loop   Datesheet

If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.

Know more at:

Get the Starter Kits at: