My Cart

Raspberry Pi 3 Model B

38.5 €38.50

Availability: In stock

This is the third generation of Raspberry Pi. It has a faster 64bits processor than its predecessors, includes 1GB RAM, wireless connectivity (WiFi and BLE) and keeps the pinout of the previous models, so you can use any shield or board designed for it.
Check below the product features and specifications.

Add to Compare


The Raspberry Pi 3 is the third generation Raspberry Pi, it has an identical form factor to the previous Pi 2 and has complete compatibility with its predecessors.

Compraring with the Raspberry 2 it has the following features:

Features Raspberry Pi 3 Raspberry Pi 2
CPU 1.2GHz 64-bit quad-core ARMv8 900MHz quad-core ARM Cortex-A7
GPU 400MHz VideoCore IV 250MHz VideoCore IV
Storage Micro-SD Micro-SD
USB ports 4 4
Ethernet 10/100 10/100
Wireless 802.11n / Bluetooth 4.1 / Bluetooth Low Energy None
Video Output HDMI / Composite HDMI / Composite
Audio Output HDMI / Headphones HDMI / Headphones
GPIO 40 pins 40 pins


  • Dimensions: 86 x 56 x 20mm
  • Broadcom BCM2837 1.2GHz 64-bit quad-core ARMv8 processor with 400MHz VideoCore IV dual-core GPU
  • GPU provides Open GL ES 2.0, hardware-accelerated OpenVG, and 1080p30 H.264 high-profile decode
  • GPU is capable of 1Gpixel/s, 1.5Gtexel/s or 24GFLOPs with texture filtering and DMA infrastructure
  • HD 1080p video output
  • Composite video (PAL/NTSC) output
  • Stereo audio output
  • 10/100 BaseT RJ45 Ethernet socket
  • HDMI 1.3 & 1.4 video/audio socket
  • 3.5mm 4-pole audio/composite video out jack socket
  • 4 x USB 2.0 sockets
  • 15-way MPI CSI-2 connector for Raspberry Pi HD video camera (775-7731)
  • 15-way Display Serial Interface connector
  • MicroSD card socket
  • 40-pin header for GPIO and serial buses
  • Power supply: +5V @ 2A via microUSB socket


Related Tutorials

The idea behind the Raspberry Pi to Arduino shields connection bridge is to allow to use any of the shields, boards and modules designed for Arduino in Raspberry Pi.

It includes also the possibility of connecting digital and analog sensors, using the same pinout of Arduino but with the power and capabilities of Raspberry.

Libelium's LoRa module works in both 868 and 900 MHz ISM bands, which makes it suitable for virtually any country. Those frequency bands are lower than the popular 2.4 GHz band, so path loss attenuation is better in LoRa. In addition, 868 and 900 MHz are bands with much fewer interference than the highly populated 2.4 GHz band.

Besides, these low frequencies provide great penetration in possible materials (brick walls, trees, concrete), so these bands get less loss in the presence of obstacles than higher bands.

The Arduino XBee shield allows your Arduino board to communicate wirelessly using Zigbee. It was developed in collaboration with Arduino. This documentation describes the use of the shield with the XBee module.

It is also compatible with Raspberry Pi using the Raspberry Pi to Arduino shields connection bridge.

The usage of the Radiation Sensor Board board along with the affordable and easy to use Arduino platform helps people to get radiation values from specific places.

The radiation board has two main parts, the power circuit and the signal circuit.

The 3G shield for Arduino and Raspberry Pi enables the connectivity to high speed WCDMA cellular networks in order to make possible the creation of the next level of worldwide interactivity projects inside the new ""Internet of Things"" era.

If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.

Know more at:

Get the Starter Kits at: