My Cart

ProtoScrewShield

10 €10.00

Availability: Retired

The ScrewShield extends all pins of the Arduino out to 3.5mm pitch screw terminals. It also has a lot of the utility provided by Arduino Protoshield, including: a large prototyping space of both connected and unconnected 0.1" spaced through-holes, a couple 5V and GND busses, a reset button, general use push button, and a 5mm yellow LED.

This product includes all the parts shown and comes in kit form and must be soldered together by the end user.

Kit Includes:

  • 1x ScrewShield PCB
  • 1x 5mm Yellow LED
  • 1x 330Ω Resistor
  • 2x 6-pin Stackable Headers
  • 2x 8-pin Stackable Headers
  • 2x Momentary Push Buttons
  • 6x 2-pin 3.5mm Screw Terminals
  • 8x 3-pin 3.5mm Screw Terminals

Documents:

Description

The ScrewShield extends all pins of the Arduino out to 3.5mm pitch screw terminals. It also has a lot of the utility provided by Arduino Protoshield, including: a large prototyping space of both connected and unconnected 0.1" spaced through-holes, a couple 5V and GND busses, a reset button, general use push button, and a 5mm yellow LED.

This product includes all the parts shown and comes in kit form and must be soldered together by the end user.

Kit Includes:

  • 1x ScrewShield PCB
  • 1x 5mm Yellow LED
  • 1x 330Ω Resistor
  • 2x 6-pin Stackable Headers
  • 2x 8-pin Stackable Headers
  • 2x Momentary Push Buttons
  • 6x 2-pin 3.5mm Screw Terminals
  • 8x 3-pin 3.5mm Screw Terminals

Documents:

If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.

Know more at:

Get the Starter Kits at: