We asked ourselves what we would want in a project board. What would an ideal platform for most any given project look like? After putting a laundry list together of 'wants' and 'needs', we created the SparkFun Protoboards. We hope you like it as much as we do.
The marsupial naming convention is what happens when you let Engineers into a Marketing meeting. They looked so happy, we just couldn't tell them no. Koala
is the board with USB serial, charging, and PTH proto.
This is a project board specially designed to fit the Sparkfun Enclosures. The board provides the user with 3.3V and 5V regulated rails from a single Lithium Polymer battery. USB serial communication is also on-board with an FTDI FT232 USB chip, with selectable 3.3V or 5V logic. Many of the serial pins of the FT232RL, including RTS, are broken out. Finally, the board has a generous prototyping area for through-hole components (2.54mm, 100mil spaced holes).
The LiPo cell plugs into the provided JST connector, and charging is available over USB (100mA) or external source (5V, 250mA).
Note: This board was primarily designed to be used with a lithium polymer battery, the voltage output is only stable at 5 volts when the battery is connected. If a battery is not connected the board voltage bypasses the regulator and can be as high as 6.5V.
- 5V@265mA (DC-DC Step Up)
- LiPo Battery Connection (3.8V nominal)
- USB-Serial TTL connection
- Proto Area for PTH
- Fits SparkFun enclosure