This is a light weight, high energy density polymer lithium battery. It outputs a nominal 3.7v at 2200mAh, including built-in protection against over voltage, over current, and minimum voltage. It comes terminated with a standard 2-pin JST connector-2.0 mm spacing between pins. Ā Please do not attempt to charge these with anything but a specialized Lithium Polymer charger.Ā Ā Recommended chargers for 3.7V polymer lithium battery: Li-po Rider LiPo Rider Pro Solar Charger Shield V2 Energy Shield Ā Features Excellent long-term self-discharge rates Robust power source under extreme conditions (-25 to 60Ā°C) CE, Rosh, UN38.3 compliance Ā Specifications Charge voltage: 4.2V Nominal Voltage: 3.7V Nominal capacity: 2200mAh @ 0.2C discharge Minimum rated capacity: 2100mAh @ 0.2C discharge Max. Charge current: 2.2A Max. Discharge current: 3.3A Cell weight: Approx.42g Dimension: 53mm x 51mm x 8.5mm Connector type: JST2.0mm Wire length: 60Ā±5mm Ā Documents PL805050P 2200mAh 1S1P UN38.3 Test Report CE Test Report Verification of EMC Compliance Cargo Transportation Test Report by Air Cargo Transportation Test Report by Sea
If you are interested in Internet of Things (IoT) or M2M projects check our open
source sensor platform Waspmote
which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.
Know more at:
Get the Starter Kits at: