My Cart

Open Workbench Logic Sniffer

64 €64.00

Availability: Retired

The Open Workbench Logic Sniffer is an open source logic analyzer with a USB interface. The hardware is designed for the SUMP open source logic analyzer client and toolchain. This project is a collaboration between the Gadget Factory and Dangerous Prototypes.

Features
* Capture 50MHz+ waveforms on 32 channels:
   - 200Msps captures up to 100MHz waveforms on 16 channels
   - 100Msps captures up to 50MHz waveforms on 32 channels
* 16 buffered channels, 5volt tolerant:
   - M74LCX16245DTR2Gtransceiver tolerates voltages from -0.5V to +7V.
* 216K Block RAM supports following memory configurations*:    - 8 channels with 24K sample depth
   - 16 channels with 12K sample depth
   - 32 channels with 6K sample depth
* External clock and trigger input:
   - Allows interfacing with external test equipment and daisy chaining OLS's for additional channels
* Internal clock and trigger output
* 16bit wing expansion header
* USB interface, USB powered
* USB upgradable everything
* Designed for the SUMP logic analyzer client
* Open source
* Low price

 

Memory depth is the maximum supported by the hardware, the current firmware implements the following memory depths:
* 8 channels with 16K sample depth
* 16 channels with 8K sample depth
* 32 channels with 4K sample depth

Description

The Open Workbench Logic Sniffer is an open source logic analyzer with a USB interface. The hardware is designed for the SUMP open source logic analyzer client and toolchain. This project is a collaboration between the Gadget Factory and Dangerous Prototypes.

Features
  • Capture 50MHz+ waveforms on 32 channels
    • 200Msps captures up to 100MHz waveforms on 16 channels
    • 100Msps captures up to 50MHz waveforms on 32 channels
  • 16 buffered channels, 5volt tolerant
  • 216K Block RAM supports following memory configurations*
    • 8 channels with 24K sample depth
    • 16 channels with 12K sample depth
    • 32 channels with 6K sample depth
  • External clock and trigger input
    • Allows interfacing with external test equipment and daisy chaining OLS's for additional channels.

If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.

Know more at:

Get the Starter Kits at: