The MiCS-2610 is a resistive sensor that allows to measure the variation of the O3 concentration between 10ppb and 1000ppb. It’s resistance varies between 11kΩ and 2MΩ approximately. Unlike the MiCS-2710, this sensor is powered through a 2.5V voltage regulator, with consumption of approximately 34mA. The sensor’s resistance in air, as well as its sensitivity, can vary between different units, so it is recommended to calibrate each one of them before finally inserting them in the application.
Measurement range: 10 ~ 1000ppb
Air resistance: 3 ~ 60kΩ (typically 11kΩ)
Sensitivity: 2 ~ 4 (typically 1.5, ratio between the resistance at 100ppm and at 50ppm)
Supply voltage: 1.95 ~ 5V DC
Operating temperature: -30 ~ +85ºC
Response time: 30 seconds
Average consumption: 34mA
Waspmote Quick Tutorial
Waspmote Technical Guides
Sensor Boards Technical Guides
50 Applications with Waspmote
FAQ: Waspmote Vs. Arduino
If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.
Know more at:
Get the Starter Kits at: