My Cart

    • The product Heating Pad - 5x10cm has been added to comparison list.

MP3 player shield

29 €29.00

Availability: On Demand

Description: This new revision of the MP3 player shield retains the awesome MP3 decoding abilities of the last version but adds the storage functionality of the SD card shield. Now you can pull MP3 files from an microSD card and play them using only one shield, effectively turning any Arduino into a fully functional stand-alone MP3 player! The MP3 Shield still utilizes the VS1053B MP3 audio decoder IC to decode audio files. The VS1053 is also capable of decoding Ogg Vorbis/MP3/AAC/WMA/MIDI audio and encoding IMA ADPCM and user-loadable Ogg Vorbis. The VS1053 receives its input bitstream through a serial input bus (SPI). After the stream has been decoded by the IC, the audio is sent out to both a 3.5mm stereo headphone jack, as well as a 2-pin 0.1" pitch header. This shield comes populated with all components as shown in the images and schematic; but it does not come with headers installed. We recommend the 6 and 8-pin stackable headers. Note: Please refer to the Line Out document below for important information regarding connecting this shield directly to an amplifier. Features: 3.5mm audio out jack 0.1" spaced header for speaker out microSD card slot Documents: Schematic Eagle Files Datasheet (VS1053B) Quickstart Guide MP3 Player Example Code Line Out Information Sample MP3 Files MP3 Player Control Example MP3 Decoding Example Sketch
Qty:
Add to Compare

Description

Description: This new revision of the MP3 player shield retains the awesome MP3 decoding abilities of the last version but adds the storage functionality of the SD card shield. Now you can pull MP3 files from an microSD card and play them using only one shield, effectively turning any Arduino into a fully functional stand-alone MP3 player! The MP3 Shield still utilizes the VS1053B MP3 audio decoder IC to decode audio files. The VS1053 is also capable of decoding Ogg Vorbis/MP3/AAC/WMA/MIDI audio and encoding IMA ADPCM and user-loadable Ogg Vorbis. The VS1053 receives its input bitstream through a serial input bus (SPI). After the stream has been decoded by the IC, the audio is sent out to both a 3.5mm stereo headphone jack, as well as a 2-pin 0.1" pitch header. This shield comes populated with all components as shown in the images and schematic; but it does not come with headers installed. We recommend the 6 and 8-pin stackable headers. Note: Please refer to the Line Out document below for important information regarding connecting this shield directly to an amplifier. Features: 3.5mm audio out jack 0.1" spaced header for speaker out microSD card slot Documents: Schematic Eagle Files Datasheet (VS1053B) Quickstart Guide MP3 Player Example Code Line Out Information Sample MP3 Files MP3 Player Control Example MP3 Decoding Example Sketch

If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.

Know more at:

Get the Starter Kits at: