My Cart

MiP Expansion Socket - 4-pin JST

0.95 €0.95

Availability: Retired

This is a 4-Pin JST Expansion Socket that can be used in conjunction with the MiP Robotic Platform. Inside each MiP is a small 4-pin JST connector, similar to this one, attached to its main board, with the MiP Expansion Cable you will be able to connect directly into the robots UART port and to one of our Proto-Backs or Proto-Packs and creat new and unique additions to your robot! Each expansion socket features a 1.5mm pitch which will fit a cable very tight to reduce its chances of coming loose during operation.Documents:Datasheet

Description

This is a 4-Pin JST Expansion Socket that can be used in conjunction with the MiP Robotic Platform. Inside each MiP is a small 4-pin JST connector, similar to this one, attached to its main board, with the MiP Expansion Cable you will be able to connect directly into the robots UART port and to one of our Proto-Backs or Proto-Packs and creat new and unique additions to your robot! Each expansion socket features a 1.5mm pitch which will fit a cable very tight to reduce its chances of coming loose during operation.Documents:Datasheet

If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.

Know more at:

Get the Starter Kits at: