My Cart

LoRaWAN Radio Shield for Arduino - 433 MHz

90 €90.00

Availability: In stock

The LoRaWAN module + Multiprotocol Radio Shield include a 433 MHz antenna to be used in this frequency.

Qty:
Add to Compare

Description

This kit includes: a LoRaWAN module 433 MHz, a Multiprotocol Radio Shield and a 4.5 dBi Antenna.

Specifications:

  • Protocol: LoRaWAN 1.0, Class A
  • LoRaWAN - ready
  • Frequency: 433 MHz ISM frequency band
  • TX Power: up to +14 dBm
  • Sensitivity: as good as -136 dBm
  • Range: >15 km at suburban and >5 km at urban area. Typically, each base station covers some km. Check the LoRaWAN Network in your area.
  • Chipset consumption: 38.9 mA
  • Radio Bit Rate: from 250 to 5470 bps
  • Receiver: purchase your own base station or use networks from LoRaWAN operators

The Multiprotocol Radio Shield is an interconnection shield for Arduino, and was designed to connect two communication modules at the same time. This that means a lot of possibilities and applications can be made using the cooking-hacks modules.

Note: As indicated in the product name, this item is valid for Arduino. It is NOT compatible with Waspmote. If you are interested in a Waspmote unit with LoRaWAN connectivity, please consider these items:

Related Tutorials

The Libelium LoRaWAN module has been integrated into the main sensor lines Waspmote and Plug & Sense!, however it has also been ported to Arduino and Raspberry Pi, so now you can create your own Low Power Wide Area Network (LPWAN) networks.

LoRaWAN is a new, private and spread-spectrum modulation technique which allows sending data at extremely low data-rates to extremely long ranges. The low data-rate (down to few bytes per second) and LoRaWAN modulation lead to very low receiver sensitivity (down to -136 dBm), which combined to an output power of +14 dBm means extremely large link budgets: up to 150 dB, what means more than 22km (13.6 miles) in LOS links and up to 2km (1.2miles) in NLOS links in urban environment (going through buildings).

The Multiprotocol Radio Shield is an interconnection shield for Arduino, and was designed to connect two communication modules at the same time. This that means a lot of possibilities and applications can be made using the cooking-hacks modules.

The Multiprotocol Radio Shield includes the SPI bus connections that allows the use of the RS-485 and CAN Bus modules, but also is compatible with the rest of the cooking-hacks modules as RFID, XBee and Bluetooth.

If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.

Know more at:

Get the Starter Kits at: