My Cart

LoRaWAN Module 868 with Expansion Board

83 €83.00

Availability: In stock

This pack includes a LoRaWAN module 868 MHz, a Waspmote Expansion Board and a 4.5 dBi Antenna.

This pack includes the Expansion Board for being used as a second radio. You can buy the LoraWAN module 868 separately from here.

Qty:
Add to Compare

Description

The LoRaWAN module 868 includes an 868 MHz antenna to be used in this frequency.

Specifications:

  • Protocol: LoRaWAN 1.0, Class A
  • LoRaWAN - ready
  • Frequency: 868 MHz ISM frequency band
  • TX Power: up to +14 dBm
  • Sensitivity: as good as -136 dBm
  • Range: >15 km at suburban and >5 km at urban area. Typically, each base station covers some km. Check the LoRaWAN Network in your area.
  • Chipset consumption: 38.9 mA
  • Radio Bit Rate: from 250 to 5470 bps
  • Receiver: purchase your own base station or use networks from LoRaWAN operators

The Expansion Board allows to connect two radios at the same time. This means a lot of different combinations are now possible using any of the ten radios available for Waspmote: 802.15.4, ZigBee, Bluetooth, RFID, RFID/NFC, WiFi, GSM/GPRS, 3G/GPRS, 868 MHz and 900 MHz.

This pack includes a LoRaWAN module 868 MHz, a Waspmote Expansion Board and a 4.5 dBi Antenna.

Documentation:
Waspmote Quick Tutorial
Waspmote Site 
Waspmote Technical Guides 
Sensor Boards Technical Guides 
Networking Guides 
Developers Forum 
Videos 
Articles 
50 Applications with Waspmote 
FAQ: Waspmote Vs. Arduino

 

Related Tutorials

The Libelium LoRaWAN module has been integrated into the main sensor lines Waspmote and Plug & Sense!, however it has also been ported to Arduino and Raspberry Pi, so now you can create your own Low Power Wide Area Network (LPWAN) networks.

LoRaWAN is a new, private and spread-spectrum modulation technique which allows sending data at extremely low data-rates to extremely long ranges. The low data-rate (down to few bytes per second) and LoRaWAN modulation lead to very low receiver sensitivity (down to -136 dBm), which combined to an output power of +14 dBm means extremely large link budgets: up to 150 dB, what means more than 22km (13.6 miles) in LOS links and up to 2km (1.2miles) in NLOS links in urban environment (going through buildings).

If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.

Know more at:

Get the Starter Kits at: