My Cart

LoRa 900 / 915 Extreme Range Connectivity Kit

From: €242.15

To: €357.50

Price as configured: €0.00

Important: We do not have stock of LoRa 900 / 915 Extreme Range Connectivity Kit. Until February 17 this product is in Back Order. Sorry for the inconvenience.

Create wireless links of more than 15km!

The LoRa Extreme Range Connectivity Kit for Arduino, Raspberry Pi and Intel Galileo includes the products listed below.

The LoRa module is fully compatible with the Raspberry Pi 2 model B with our latest software.

1 x Starter Kit (core)   +€35.00
1 x LoRa 900 / 915 Extreme Range Connectivity Kit (core)   +€207.15

* Required Fields

Price as configured: €0.00

Qty:
Add to Compare

Description

Create wireless links of more than 15km!

The LoRa Extreme Range Connectivity Kit for Arduino, Raspberry Pi and Intel Galileo includes:

Note: The LoRa module is fully compatible with the Raspberry Pi 2 model B with our latest software.

LoRa VS LoRaWAN

Libelium currently offers two options of this type of radio technology: LoRa and LoRaWAN

  • LoRa contains only the link layer protocol and is perfect to be used in P2P communications between nodes. LoRa modules are a little cheaper that the LoRaWAN ones. It works in the 868 and 900MHz bands. Go to the LoRa Tutorial.
  • LoRaWAN includes the network layer too so it is possible to send the information to any Base Station already connected to a Cloud platform. LoRaWAN modules may work in the 868/900/433MHz bands. Go to the LoRaWAN Tutorial.

Related Tutorials

Libelium's LoRa module works in both 868 and 900 MHz ISM bands, which makes it suitable for virtually any country. Those frequency bands are lower than the popular 2.4 GHz band, so path loss attenuation is better in LoRa. In addition, 868 and 900 MHz are bands with much fewer interference than the highly populated 2.4 GHz band.

Besides, these low frequencies provide great penetration in possible materials (brick walls, trees, concrete), so these bands get less loss in the presence of obstacles than higher bands.

This tutorial allows the user to turn on and off a RGB LED with different colors depending on the data sent by the LoRa gateway.

This project can be developed with Arduino or Intel Galileo. It is also compatible with Raspberry Pi using the Raspberry Pi to Arduino shields connection bridge.

This tutorial allows the user to measure the temperature and the light level in a room. This data is sent to a LoRa gateway.

This project can be developed with Arduino or Intel Galileo. It is also compatible with Raspberry Pi using the Raspberry Pi to Arduino shields connection bridge.

This tutorial allows the user to move a servo to different angles depending on the data sent by the LoRa gateway.

This project can be developed with Arduino or Intel Galileo. It is also compatible with Raspberry Pi using the Raspberry Pi to Arduino shields connection bridge.

The idea behind the Raspberry Pi to Arduino shields connection bridge is to allow to use any of the shields, boards and modules designed for Arduino in Raspberry Pi.

It includes also the possibility of connecting digital and analog sensors, using the same pinout of Arduino but with the power and capabilities of Raspberry.

The current tutorial explains how to take the most of the Galileo board by using on it the Arduino and Raspberry Pi shields and modules designed by Cooking Hacks

Galileo comes with a single-core 32-bit, 400MHz Quark SoC X1000 processor, supports 3.3 or 5 volt shields and has an Ethernet and USB port. Compatible with Windows, Mac OS and Linux, the software of Galileo also has support for the Arduino shield ecosystem.

If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.

Know more at:

Get the Starter Kits at: