My Cart

Lectro Candle Kit

13.65 €13.65

Availability: Retired

Description: The LectroCandle is a simple, through-hole kit, comprised mainly of 3 RGB LEDs and an ATtiny85 to control them. Essentially, the Lectro Candle is exactly what it sounds like an LED-based candle that cycles through all the colors of the rainbow. The programming pins of the ATtiny85 are also brought out on the PCB, so you can customize the firmware however you want. This is a perfect kit to start exploring physical computing and play around with LEDs!

This kit comes as a bag of parts, which you'll need to solder onto the PCB. All components are through-hole, so this kit is great for that first-time solderer. Make sure you install everything with the correct polarity!

Batteries not included!

Kit Includes:

  • 1x Lectro Candle PCB
  • 1x ATtiny85 - Programmed for Lectro Candle
  • 1x 2xAA Battery Holder with Cover and Switch
  • 3x RGB LEDs
  • 1x Resistor - 10K
  • 3x Resistor - 330
  • 1x 0.1uF Ceramic Capacitor

Documents:

Description

Description: The LectroCandle is a simple, through-hole kit, comprised mainly of 3 RGB LEDs and an ATtiny85 to control them. Essentially, the Lectro Candle is exactly what it sounds like an LED-based candle that cycles through all the colors of the rainbow. The programming pins of the ATtiny85 are also brought out on the PCB, so you can customize the firmware however you want. This is a perfect kit to start exploring physical computing and play around with LEDs!

This kit comes as a bag of parts, which you'll need to solder onto the PCB. All components are through-hole, so this kit is great for that first-time solderer. Make sure you install everything with the correct polarity!

Batteries not included!

Kit Includes:

  • 1x Lectro Candle PCB
  • 1x ATtiny85 - Programmed for Lectro Candle
  • 1x 2xAA Battery Holder with Cover and Switch
  • 3x RGB LEDs
  • 1x Resistor - 10K
  • 3x Resistor - 330
  • 1x 0.1uF Ceramic Capacitor

Documents:

If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.

Know more at:

Get the Starter Kits at: