My Cart

Laser Engraver Upgrade Pack for XY-Plotter Robot Kit V2.0

119.99 €119.99

Availability: Retired

Introduction: Laser Engraver Upgrade Pack is for XY Plotter Robot Kit V2.0, it can engrave by laser. Note: The higher output power of the laser, the better processing capacity it is. The 500mW laser engraver can do better engraving and cutting ability, it takes less time and more efficient than the 250mW laser engraving. Follow the instruction, assembly the lasers elements to the assembled XY Plotter Robot Kit V2.0 and upload the firmware to the Me Baseboard. You can use Benbox Laser Engraver to control the laser engraver robot to engrave fabulous artworks. For reference video as below: (https://www.youtube.com/watch?v=Y2Hj5XXX_hc). Wavelength ?= 405nm Blue-Violet Laser 450~500mW semiconductor diode lasers elements Working area: 300mm×350mm Engrave accuracy:0.1mm   Suggested material: (1) suggested engrave material: wood board, colorful paper cards, dark opaque acrylic, etc. (2) suggested cutter material: colorful paper cards, foam papers, etc. Usage: For the places required engraving or cutter such as families, hacker spaces, schools, companies, etc. Minimum age: 18 ages. Under the age of 18, please use under the care of their parents   Security: Pay attention when you’re operating the blue-violet laser MAKE SURE you’re wearing the goggles to avoid the dangers. Specification: Frame: Anodized aluminum Physical Dimensions(L×W×H): 620mm × 620mm×140mm Engrave materials: Wood boards, colorful paper cards, dark opaque acrylic, foam papers, etc. Cutting materials: Colorful paper cards, foam papers, etc. Working area (X×Y): 300mm×350mm XY Resolution: 0.1mm Max Speed: 50mm/s Power: 100-240 V~50/60Hz AC/DC Power adapter, 12V/2.0A Software: Benbox Laser Engraver Supports file type: JPG?PNG?BMP?GIF?DXF Connections: USB Electronics: Makeblock Me_baseboard

Description

Introduction: Laser Engraver Upgrade Pack is for XY Plotter Robot Kit V2.0, it can engrave by laser. Note: The higher output power of the laser, the better processing capacity it is. The 500mW laser engraver can do better engraving and cutting ability, it takes less time and more efficient than the 250mW laser engraving. Follow the instruction, assembly the lasers elements to the assembled XY Plotter Robot Kit V2.0 and upload the firmware to the Me Baseboard. You can use Benbox Laser Engraver to control the laser engraver robot to engrave fabulous artworks. For reference video as below: (https://www.youtube.com/watch?v=Y2Hj5XXX_hc). Wavelength ?= 405nm Blue-Violet Laser 450~500mW semiconductor diode lasers elements Working area: 300mm×350mm Engrave accuracy:0.1mm   Suggested material: (1) suggested engrave material: wood board, colorful paper cards, dark opaque acrylic, etc. (2) suggested cutter material: colorful paper cards, foam papers, etc. Usage: For the places required engraving or cutter such as families, hacker spaces, schools, companies, etc. Minimum age: 18 ages. Under the age of 18, please use under the care of their parents   Security: Pay attention when you’re operating the blue-violet laser MAKE SURE you’re wearing the goggles to avoid the dangers. Specification: Frame: Anodized aluminum Physical Dimensions(L×W×H): 620mm × 620mm×140mm Engrave materials: Wood boards, colorful paper cards, dark opaque acrylic, foam papers, etc. Cutting materials: Colorful paper cards, foam papers, etc. Working area (X×Y): 300mm×350mm XY Resolution: 0.1mm Max Speed: 50mm/s Power: 100-240 V~50/60Hz AC/DC Power adapter, 12V/2.0A Software: Benbox Laser Engraver Supports file type: JPG?PNG?BMP?GIF?DXF Connections: USB Electronics: Makeblock Me_baseboard

If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.

Know more at:

Get the Starter Kits at: