My Cart

Joystick Shield Kit

10.85 €10.85

Availability: Retired

Description: The Joystick Shield kit contains all the parts you need to enable your Arduino with a joystick! The shield sits on top of your Arduino and turns it into a simple controller. Five momentary push buttons (4+ joystick select button) and a two-axis thumb joystick gives your Arduino functionality on the level of old Nintendo controllers. Soldering is required, but it's relatively easy and requires minimal tools.
The momentary push buttons are connected to Arduino digital pins 2-6; when pressed they will pull the pin low (utilizing the internal pull-ups of the Arduino). Vertical movement of the joystick will produce a proportional analog voltage on analog pin 0, likewise, horizontal movement of the joystick can be tracked on analog pin 1.

This product is the entire kit and contains the following items:

  • 1x Joystick Shield PCB
  • 4x Momentary Push Button Switch - 12mm Square
  • 1x Thumb Joystick
  • 1x Mini Push Button Switch (breaks out Arduino's reset switch)
  • 2x 6-pin Arduino Stackable Header
  • 2x 8-pin Arduino Stackable Header

Documents:

Description

Description: The Joystick Shield kit contains all the parts you need to enable your Arduino with a joystick! The shield sits on top of your Arduino and turns it into a simple controller. Five momentary push buttons (4+ joystick select button) and a two-axis thumb joystick gives your Arduino functionality on the level of old Nintendo controllers. Soldering is required, but it's relatively easy and requires minimal tools.
The momentary push buttons are connected to Arduino digital pins 2-6; when pressed they will pull the pin low (utilizing the internal pull-ups of the Arduino). Vertical movement of the joystick will produce a proportional analog voltage on analog pin 0, likewise, horizontal movement of the joystick can be tracked on analog pin 1.

This product is the entire kit and contains the following items:

  • 1x Joystick Shield PCB
  • 4x Momentary Push Button Switch - 12mm Square
  • 1x Thumb Joystick
  • 1x Mini Push Button Switch (breaks out Arduino's reset switch)
  • 2x 6-pin Arduino Stackable Header
  • 2x 8-pin Arduino Stackable Header

Documents:

If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.

Know more at:

Get the Starter Kits at: