My Cart

Intel® Edison Hardware Pack

2.95 €2.95

Availability: Retired

This is a Hardware Pack for the Intel® Edison, with this set you will be provided with increased mechanical strength for stacking Blocks. Each Hardware Pack includes ten M2x3mm standoffs, six M2x3mm screws, and six M2 nuts. With this set of hardware you will be able to secure three Blocks to one Intel® Edison. Eight standoffs and four screws and nuts are used for the Blocks, while two standoffs, screws, and nuts are used for the Intel® Edison itself.If you are looking to give your Intel® Edison stack a little more stability, this Hardware Pack is perfect for you!Note: You will need to torque the screws down for increased stability due to the Block boards being so thin.Includes:10x Standoff - M2 x 3mm6x Phillips Head Screw - M2 x 3mm6x Nut - M2

Description

This is a Hardware Pack for the Intel® Edison, with this set you will be provided with increased mechanical strength for stacking Blocks. Each Hardware Pack includes ten M2x3mm standoffs, six M2x3mm screws, and six M2 nuts. With this set of hardware you will be able to secure three Blocks to one Intel® Edison. Eight standoffs and four screws and nuts are used for the Blocks, while two standoffs, screws, and nuts are used for the Intel® Edison itself.If you are looking to give your Intel® Edison stack a little more stability, this Hardware Pack is perfect for you!Note: You will need to torque the screws down for increased stability due to the Block boards being so thin.Includes:10x Standoff - M2 x 3mm6x Phillips Head Screw - M2 x 3mm6x Nut - M2

If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.

Know more at:

Get the Starter Kits at: