My Cart

Industrial protocols RS-232 LoRaWAN EU/433 IoT kit

Availability: Retired

This kit includes the features of the LoRaWAN connectivity plus the benefits of having a RS-232 connection to be integrated with industrial devices.

  • 1x Waspmote LoRaWAN EU/433
  • 1x RS-232 module
  • 1x Expansion Board
  • 1x 6600mA/h Rechargeable Battery

Description

Connect your existing industrial equipment to Waspmote and transmit via wireless protocols the data without interfering in your existing SCADA or software systems. With these industrial protocol kits, you will be able to connect a wide range of computer and automation systems, PLCs, industrial PCs, electricity, water or gas counters, data-loggers, industrial sensors, etc.

This kit includes the features of the LoRaWAN connectivity plus the benefits of having a RS-232 connection to be integrated with industrial devices. LoRaWAN is a new, private and spread-spectrum modulation technique which allows sending data at extremely low data-rates to extremely long ranges. The low data-rate (down to few bytes per second) and LoRaWAN modulation lead to very low receiver sensitivity (down to -136 dBm), which combined to an output power of +14 dBm means extremely large link budgets: up to 150 dB, what means more than 22 km (13.6 miles) in LOS links and up to 2 km (1.2 miles) in NLOS links in urban environment (going through buildings).

The RS-232 standard was first introduced in 1962 by the Radio Sector of the EIA. The original DTEs (data terminal equipment) were electromechanical teletypewriters, and the original DCEs (data circuit-terminating equipment) were usually modems. For many years, an RS-232-compatible port was a standard feature for serial communications, such as modem connections, on many computers. The RS-232 standard is still used to connect industrial equipment (such as PLCs), console ports and special purpose equipment.

Waspmote is an open source wireless sensor platform specially focused on the implementation of low consumption modes which allows the sensor nodes ("motes") to be completely autonomous, that is battery powered. Lifetime of Waspmote sensor nodes may go from 1 to 5 years depending on the duty cycle and the radio used.

Waspmote is based on a modular architecture. The idea is to integrate only the modules needed in each device optimizing costs. For this reason all the modules (radios, sensor boards, etc) plug in Waspmote through sockets.

If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.

Know more at:

Get the Starter Kits at: