My Cart

IIC TO GPIO module

10 €10.00

Availability: Retired

When Arduino is used for robots or interactive media, digital IO port is always found not enough? IIC now turn I / O modules to help you solve the problem, Arduino only two data lines (SCL-Analog PIN5, SDA-Analog PIN4) and IIC can transfer I / O module communication, to convert the 16 digital IO ports, read-write. 8 simultaneous parallel modules, each module can be set to address.

Specifications

  • Module power supply: +5 V
  • 16 Digital IO port comes with internal pull-up
  • Can be set to eight addresses (address range of 0x20 ~ 0x27)
  • 8 modules simultaneously in parallel (IIC bus need to pull together)
  • Module Size: 42x40mm

Documents

Description

When Arduino is used for robots or interactive media, digital IO port is always found not enough? IIC now turn I / O modules to help you solve the problem, Arduino only two data lines (SCL-Analog PIN5, SDA-Analog PIN4) and IIC can transfer I / O module communication, to convert the 16 digital IO ports, read-write. 8 simultaneous parallel modules, each module can be set to address.

Specifications

  • Module power supply: +5 V
  • 16 Digital IO port comes with internal pull-up
  • Can be set to eight addresses (address range of 0x20 ~ 0x27)
  • 8 modules simultaneously in parallel (IIC bus need to pull together)
  • Module Size: 42x40mm

Documents

If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.

Know more at:

Get the Starter Kits at: