My Cart

Hobby Motor and Encoder Kit

19.95 €19.95

Availability: Retired

This is the Hobby Motor and Encoder Kit from DAGU, an inexpensive and reliable set of add-ons for your next robotic project. Inside this kit are three pairs of items: wheels, gearmotors, and wheel encoders (including everything you need to hook them up). The Hobby Motor and Encoder Kit is perfect for providing beginners with a cheap and easy to use setup or if you just need a few extra parts.The off set gear motors included with this kit require a voltage of 3-6V with a no load current of 200mA and possess a stall current of 3A@6V (1.5A@3V), a gearbox ratio of 48:1, and a wheel speed of 65RPm at 3V unloaded. Each wheel encoder in this kit requires a supply voltage of 3-24V, a supply current of 4mA, consists of two neodymium 8-pole magnets with rubber hubs, and two hall-effect sensors terminated with 150mm cables and 3-pin female servo headers. Includes:2x DG02S Mini DC Gear Motor2x Wheel - 65mm1x Wheel Encoder Kit (Set of 2)Features:Gear MotorVoltage: 3V – 6VNo Load Current: 200mAStall Current: 3A @ 6V (1.5A @ 3V)Gearbox Ratio: 48:1Wheel Speed: 65rpm @ 3V unloaded (Recommended)Wheel EncoderVoltage: 3V – 24V with reverse polarity protectionEncoder Type: 8-pole neodymium magnet and hall-effect sensorEncoder Output: Open drain with short circuit protectionDocuments:Datasheet

Description

This is the Hobby Motor and Encoder Kit from DAGU, an inexpensive and reliable set of add-ons for your next robotic project. Inside this kit are three pairs of items: wheels, gearmotors, and wheel encoders (including everything you need to hook them up). The Hobby Motor and Encoder Kit is perfect for providing beginners with a cheap and easy to use setup or if you just need a few extra parts.The off set gear motors included with this kit require a voltage of 3-6V with a no load current of 200mA and possess a stall current of 3A@6V (1.5A@3V), a gearbox ratio of 48:1, and a wheel speed of 65RPm at 3V unloaded. Each wheel encoder in this kit requires a supply voltage of 3-24V, a supply current of 4mA, consists of two neodymium 8-pole magnets with rubber hubs, and two hall-effect sensors terminated with 150mm cables and 3-pin female servo headers. Includes:2x DG02S Mini DC Gear Motor2x Wheel - 65mm1x Wheel Encoder Kit (Set of 2)Features:Gear MotorVoltage: 3V – 6VNo Load Current: 200mAStall Current: 3A @ 6V (1.5A @ 3V)Gearbox Ratio: 48:1Wheel Speed: 65rpm @ 3V unloaded (Recommended)Wheel EncoderVoltage: 3V – 24V with reverse polarity protectionEncoder Type: 8-pole neodymium magnet and hall-effect sensorEncoder Output: Open drain with short circuit protectionDocuments:Datasheet

If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.

Know more at:

Get the Starter Kits at: