My Cart

Grove - OLED Display 0.96''

14.9 €14.90

Availability: Retired

Grove - OLED 0.96'' is a 16 color grayscale 96×96 dot matrix OLED display module with Grove compatible 4pin I2C interface.Grove - OLED 0.96" is constructed with 96 x 96 dot matrix OLED module ([ LY120])and SSD1327 driver IC. The characteristics of this display module are high brightness, self-emission, high contrast ratio, slim / thin outline, wide viewing angle, wide temperature range, and low power consumption.   Features Dot Matrix: 96 x 96 Pixels. Color: Grayscale Display (16 Gray shades). Supports both Normal and Inverse Color Display. Supports Continuous Horizontal Scrolling. Grove compatible 4pin I2C connector. Works with both 5V and 3.3V logic MCUs. Interface: I2C. Wide range of operating temperature: -40°C ~ 7°C. Application Ideas Graphic display adapter for Seeeduino and Arduino using Grove stem board . Display adapter for any 5V or 3.3V MCU which supports I²C interface. Can be used with mbed microcontroller.                 For all Grove users (especially beginners), we provide you guidance PDF documents. Please download and read through Preface - Getting Started and Introduction to Grove before your using of the product.   Documents Please visit our wiki page for more info about this product. It will be appreciated if  you can help us improve the documents, add more demo code or tutorials. For technical support, please post your questions to our forum.

Description

Grove - OLED 0.96'' is a 16 color grayscale 96×96 dot matrix OLED display module with Grove compatible 4pin I2C interface.Grove - OLED 0.96" is constructed with 96 x 96 dot matrix OLED module ([ LY120])and SSD1327 driver IC. The characteristics of this display module are high brightness, self-emission, high contrast ratio, slim / thin outline, wide viewing angle, wide temperature range, and low power consumption.   Features Dot Matrix: 96 x 96 Pixels. Color: Grayscale Display (16 Gray shades). Supports both Normal and Inverse Color Display. Supports Continuous Horizontal Scrolling. Grove compatible 4pin I2C connector. Works with both 5V and 3.3V logic MCUs. Interface: I2C. Wide range of operating temperature: -40°C ~ 7°C. Application Ideas Graphic display adapter for Seeeduino and Arduino using Grove stem board . Display adapter for any 5V or 3.3V MCU which supports I²C interface. Can be used with mbed microcontroller.                 For all Grove users (especially beginners), we provide you guidance PDF documents. Please download and read through Preface - Getting Started and Introduction to Grove before your using of the product.   Documents Please visit our wiki page for more info about this product. It will be appreciated if  you can help us improve the documents, add more demo code or tutorials. For technical support, please post your questions to our forum.

If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.

Know more at:

Get the Starter Kits at: