Libelium is offering new technical support channels, to contact with de Technical Support team to solve any issue our doubt please contact with your sales agent or visit our contact site



Post a new topicPost a reply Page 1 of 1   [ 8 posts ]
Author Message
 Post subject: OpenGarden Node stop sending data
PostPosted: Tue Jul 30, 2019 11:36 pm 

Joined: Thu Dec 08, 2016 10:37 am
Posts: 7
Location: Italy
Hi,
I'm running a situation where my Node stop to sending me new data.

I'm sure that this is not related to water irrigation because occurred in a middle of the day.
I'm sure that this is not RF issue because antennas are very close eachother.
I'm sure that this is not related to OpenGarden gateway because the only way I found to recover from this stuck is just a physical reset of the Opengarden Node by pwr switch until next stuck that may recur back in one or two weeks.

Do you know how this could happen?


Top
 Profile  
 
 Post subject: Re: OpenGarden Node stop sending data
PostPosted: Wed Jul 31, 2019 8:46 am 

Joined: Mon Sep 28, 2009 12:06 pm
Posts: 11366
Hi,

Could you please share with us the code that is running?

Is the issue since the beginning or started to appear suddenly?

Regards.


Top
 Profile  
 
 Post subject: Re: OpenGarden Node stop sending data
PostPosted: Wed Jul 31, 2019 1:11 pm 

Joined: Thu Dec 08, 2016 10:37 am
Posts: 7
Location: Italy
Hi,

libelium-dev wrote:
Could you please share with us the code that is running?

on the node I'm running TX sketch, uploaded at beginning of 2017.
In the gateway yesterday I've tried to debug by uploading the code: "readNode_Packet_Debug" but Serial say only: "Waiting data from nodes..."
In both case (with my code or debug code) to solve this I've to reset the Node.

libelium-dev wrote:
Is the issue since the beginning or started to appear suddenly?

For all 2017 and 2018 and half 2019 everything was off.
I can say that for ~45 days (from end of May 2019 till middle of June 2019) I never had this behavior and after occurred two times.

What I noted from the value I got from the node just before last stuck (jul 30th at 11.20 AM) was an overvoltage but this is occurring everyday at ~ same time the difference is that this time stop to send upaded values.
here mV data https://ibb.co/LpqXfjv
here soil data https://ibb.co/8mKRPzk

best regards


Top
 Profile  
 
 Post subject: Re: OpenGarden Node stop sending data
PostPosted: Thu Aug 01, 2019 6:46 am 

Joined: Mon Sep 28, 2009 12:06 pm
Posts: 11366
Hi,

It's a weird issue.

How do you power supply the devices?

Also please try to upload the code again. Which Arduino IDE are you using? We recommend to use 1.0.5 and 1.0.6 for proper operation.

Regards


Top
 Profile  
 
 Post subject: Re: OpenGarden Node stop sending data
PostPosted: Thu Aug 08, 2019 10:42 pm 

Joined: Thu Dec 08, 2016 10:37 am
Posts: 7
Location: Italy
Hi libelium-dev,
Finally I back to home, follow some update of my story.

After new physical reset of my opengarden Node, the node start again to send data to my gateway with the exception new data of my soil moisture sensor.

I tried to replace the soil moisture sensor but nothing changed.
I'm using Arduino hide 1.0.6, I've tried to upload the code again into the node but nothing changed.

So we can be with high rate of possibility now it's HW physical issue.

Can you share schematics of opengarden Node to better discover the component I've to replace?

thanks in advance.
best regards
Federico


Top
 Profile  
 
 Post subject: Re: OpenGarden Node stop sending data
PostPosted: Fri Aug 09, 2019 7:51 am 

Joined: Mon Sep 28, 2009 12:06 pm
Posts: 11366
We're sorry but the schematics of the board are not public.

Regards


Top
 Profile  
 
 Post subject: Re: OpenGarden Node stop sending data
PostPosted: Wed Aug 21, 2019 10:44 am 

Joined: Thu Dec 08, 2016 10:37 am
Posts: 7
Location: Italy
Hi

libelium-dev wrote:
We're sorry but the schematics of the board are not public.


I see, imho as this is easy pcb and not blackbox may you consider to release just the schematic as image format?
This request is just to avoid to loose half day to reverse engineering it by myself and easly identify my broken component.

Thanks in advance.
Federico


Top
 Profile  
 
 Post subject: Re: OpenGarden Node stop sending data
PostPosted: Wed Aug 21, 2019 1:09 pm 

Joined: Mon Sep 28, 2009 12:06 pm
Posts: 11366
Hi,

As an exception, we share with you a schematic of the node board,

http://www.libelium.com/forum/libelium_ ... de_sch.pdf

Regards


Top
 Profile  
 
Display posts from previous:  Sort by  
Post a new topicPost a reply Page 1 of 1   [ 8 posts ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Libelium theme based on 610nm Style by Daniel St. Jules of http://www.gamexe.net


© Libelium Comunicaciones Distribuidas S.L. | Terms of use.