Some doubts about the 3d printer

RuiBranco · **Joined:** Tue Oct 01, 2013 3:08 pm **Posts:** 1

Hello cooking-hacks,
My name is Rui and I'm from Portugal.

I want to buy 3D PRINTER COMPLETE KIT - Prusa IT3.
I liked a lot of your product to be didactic, but have no experience
with 3d printers and do not want to regret later.
So I have some doubts.
Here in Portugal sells coils wire ABS plastic, can I use plastic wire
with three millimeters thick?
I want to extend the printing area, is possible to place these new
dimensions in software with no limits?
For better resolution I can use other nozzles on the printer e.g. 0.1mm?

Best Regards,
Rui Branco

libelium-dev · **Joined:** Mon Sep 28, 2009 12:06 pm **Posts:** 11366

Hi RuiBranco,

RuiBranco wrote:

Can I use plastic wire with three millimeters thick?

Yes you can. You can use this printer with 3mm plastic.

RuiBranco wrote:

I want to extend the printing area, is possible to place these new
dimensions in software with no limits?

Yes you can, but you have to known that you have to extend the heated bed too if you want to print with ABS.

RuiBranco wrote:

For better resolution I can use other nozzles on the printer e.g. 0.1mm?

Yes, you can put the nozzle that you want.

Please visit this webpage, it can help you:

http://reprap.org/wiki/RepRap

Regards.

Libelium is offering new technical support channels, to contact with de Technical Support team to solve any issue our doubt please contact with your sales agent or visit our contact site

Some doubts about the 3d printer