/* 
 *  eHealth sensor platform for Arduino and Raspberry from Cooking-hacks.
 * 
 *  Copyright (C) Libelium Comunicaciones Distribuidas S.L.
 *  http://www.libelium.com
 * 
 *  This program is free software: you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation, either version 3 of the License, or
 *  (at your option) any later version.
 *  a
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 * 
 *  You should have received a copy of the GNU General Public License
 *  along with this program.  If not, see http://www.gnu.org/licenses/.
 * 
 *  Version:           2.0
 *  Design:            David Gascón
 *  Implementation:    Luis Martin & Ahmad Saad
 */

//Include eHealth library
#include < eHealth.h >

void loop() {

  float conductance = eHealth.getSkinConductance();
  float resistance = eHealth.getSkinResistance();
  float conductanceVol = eHealth.getSkinConductanceVoltage();

  printf("Conductance : %f \n", conductance);
  printf("Resistance : %f \n", resistance);
  printf("Conductance Voltage : %f \n", conductanceVol);

  printf("\n");

  // wait for a second
  delay(1000);
}

int main (){
   //setup();
   while(1){
      loop();
   }
   return (0);
}
            

/*
 *  eHealth sensor platform for Arduino and Raspberry from Cooking-hacks.
 *
 *  Description: "The e-Health Sensor Shield allows Arduino and Raspberry Pi
 *  users to perform biometric and medical applications by using 9 different
 *  sensors: Pulse and Oxygen in Blood Sensor (SPO2), Airflow Sensor (Breathing),
 *  Body Temperature, Electrocardiogram Sensor (ECG), Glucometer, Galvanic Skin
 *  Response Sensor (GSR - Sweating), Blood Pressure (Sphygmomanometer) and
 *  Patient Position (Accelerometer)."
 *
 *  In this example we use the skin sensor to measure some
 *  parameters like the skin resistance and coductance.
 *
 *  Copyright (C) 2012 Libelium Comunicaciones Distribuidas S.L.
 *  http://www.libelium.com
 *
 *  This program is free software: you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation, either version 3 of the License, or
 *  (at your option) any later version.
 *
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License
 *  along with this program.  If not, see <http://www.gnu.org/licenses/> .
 *
 *  Version 2.0
 *  Author: Luis Martin & Ahmad Saad
 */

#include <eHealth.h>

// the setup routine runs once when you press reset:
void setup() {
  Serial.begin(115200); 
}

// the loop routine runs over and over again forever:
void loop() {

  float conductance = eHealth.getSkinConductance();
  float resistance = eHealth.getSkinResistance();
  float conductanceVol = eHealth.getSkinConductanceVoltage();

  Serial.print("Conductance : ");       
  Serial.print(conductance, 2); 
  Serial.println("");         

  Serial.print("Resistance : ");       
  Serial.print(resistance, 2); 
  Serial.println("");   

  Serial.print("Conductance Voltage : ");       
  Serial.print(conductanceVol, 4); 
  Serial.println("");

  Serial.print("\n");

  // wait for a second 
  delay(1000);           
}