Post a new topicPost a reply Page 1 of 1   [ 8 posts ]
Author Message
 Post subject: SPO2 problem
PostPosted: Sun Oct 01, 2017 8:45 am 

Joined: Sun Oct 01, 2017 8:01 am
Posts: 18
To whom it may concern

I'm trying to monitor SPO2 values returned by e-Health platform ver 2 from serial monitor in Arduino IDE.
The board is Arduino UNO.

But, the values are completely different.

For example, when the pulse oxymeter display reads "98", serial monitor shows "6" or "0"
consecutively.

I found similar topic posted by TFK in this forum.
In that topic, the team recommended dompiling the sketch using older version of Arduino IDE (Arduino 1.0.1)

I tried this solution but to no avail. :oops:

I also have the following problems.
1. I cannot read ECG-like ECG from ECG sensor of yours. :x
2. the temperature values returned by e-Health sensor is about 3 degrees higher. :x
3. EMG sensor picks up only noise.(No phasic response observed when flexing muscle) :x

But probably, you demand me to post these as separate tipocs.

So, for now, I wait for your response abot SPO2 problem.


Top
 Profile  
 
 Post subject: Re: SPO2 problem
PostPosted: Mon Oct 02, 2017 7:47 am 

Joined: Mon Sep 28, 2009 12:06 pm
Posts: 11311
Hello hhhddd,

We can recommend that you use all versions of the library to identify if it works well with any of them:
https://www.cooking-hacks.com/documentation/tutorials/ehealth-biometric-sensor-platform-arduino-raspberry-pi-medical/#step3_1

Regards


Top
 Profile  
 
 Post subject: Re: SPO2 problem
PostPosted: Mon Oct 02, 2017 2:36 pm 

Joined: Sun Oct 01, 2017 8:01 am
Posts: 18
You mean...I should try all five versions of libraries?

I'm using the latest version.

Is it possible that some older library is better at handling pulse oxymeter data?

Isn't there any suggestions about which version is most suitable?

best


Top
 Profile  
 
 Post subject: Re: SPO2 problem
PostPosted: Tue Oct 03, 2017 8:15 am 

Joined: Mon Sep 28, 2009 12:06 pm
Posts: 11311
Hello hhhddd,

yes please try every library version, since there are different types of SPO2 and each type works with a different version of the library.

Regards


Top
 Profile  
 
 Post subject: Re: SPO2 problem
PostPosted: Wed Oct 04, 2017 7:02 pm 

Joined: Sun Oct 01, 2017 8:01 am
Posts: 18
Thank you for your suggestion.

I have two questions.

First, as you can see in other topics i posted, I'm experiencing many problems in your product (and they are driving me mad :evil: )

Do you think that using different version of library solves problems in sensors other than SPO2?

Second, I've already tried two different versions the day before yesterday (I did not take note of which version of library I tested), because your stuffs made same suggestions for SPO2 problem similar to mine in topics a few years ago.

But, at that occasion, compiling of arduino sketch failed. (again, i took no record of error message)
Do you have some ideas about the cause of this failure?

best regards


Top
 Profile  
 
 Post subject: Re: SPO2 problem
PostPosted: Thu Oct 05, 2017 8:27 am 

Joined: Mon Sep 28, 2009 12:06 pm
Posts: 11311
Hello hhhddd,

testing the different versions of the library, in effect, can solve your problem with the SPO2 sensor since there are different versions of this sensor that have been sold over time, and each version requires a different library.

Regards


Top
 Profile  
 
 Post subject: Re: SPO2 problem
PostPosted: Thu Oct 12, 2017 5:00 am 

Joined: Sun Oct 01, 2017 8:01 am
Posts: 18
Hi everyonne

sorry for bothering you, but i gave up.


Top
 Profile  
 
 Post subject: Re: SPO2 problem
PostPosted: Mon Oct 16, 2017 8:46 am 

Joined: Mon Sep 28, 2009 12:06 pm
Posts: 11311
Hello hhhddd,

we have already answered you here:
viewtopic.php?f=39&t=10719&p=33423&sid=e003995d810c755d04f1a473055b4071#p33423

Regards


Top
 Profile  
 
Display posts from previous:  Sort by  
Post a new topicPost a reply Page 1 of 1   [ 8 posts ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Libelium theme based on 610nm Style by Daniel St. Jules of http://www.gamexe.net


© Libelium Comunicaciones Distribuidas S.L. | Terms of use.