Cooking Hacks Forum :: View topic - Arduino y Multiprotocol Radio Shield

/*
* ------ LoRaWAN Code Example --------
*
* Explanation: This example shows how to configure the module
* and all general settings related to back-end registration
* process.
*
* Copyright (C) 2015 Libelium Comunicaciones Distribuidas S.L.
* http://www.libelium.com
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
* Version: 1.3
* Design: David Gascon
* Implementation: Luismi Marti
* Ported to Arduino: Ruben Martin
*/

#include <Wire.h>

// Cooking API libraries
#include <arduinoUART.h>
#include <arduinoUtils.h>

// LoRaWAN library
#include <arduinoLoRaWAN.h>

//////////////////////////////////////////////
uint8_t socket = SOCKET1;
//////////////////////////////////////////////

// Device parameters for Back-End registration
////////////////////////////////////////////////////////////
char DEVICE_EUI[] = "0102030405060708";
char DEVICE_ADDR[] = "05060708";
char NWK_SESSION_KEY[] = "01020304050607080910111213141516";
char APP_SESSION_KEY[] = "000102030405060708090A0B0C0D0E0F";
char APP_KEY[] = "000102030405060708090A0B0C0D0E0F";
////////////////////////////////////////////////////////////

// variable
uint8_t error;

void setup()
{
Serial.begin(57600);
// 1. switch on
error = LoRaWAN.ON(socket);
if (error != 0)
{
Serial.print(F("Error: "));
Serial.println(error);
}
// 2. Reset to factory default values
error = LoRaWAN.factoryReset();
if (error != 0)
{
Serial.print(F("Error: "));
Serial.println(error);
}
// 3. Set/Get Device EUI
error = LoRaWAN.setDeviceEUI(DEVICE_EUI);
if (error != 0)
{
Serial.print(F("Error: "));
Serial.println(error);
}
error = LoRaWAN.getDeviceEUI();
if (error != 0)
{
Serial.print(F("Error: "));
Serial.println(error);
}
// 4. Set/Get Device Address
error = LoRaWAN.setDeviceAddr(DEVICE_ADDR);
if (error != 0)
{
Serial.print(F("Error: "));
Serial.println(error);
}
error = LoRaWAN.getDeviceAddr();
if (error != 0)
{
Serial.print(F("Error: "));
Serial.println(error);
}
// 5. Set Network Session Key
error = LoRaWAN.setNwkSessionKey(NWK_SESSION_KEY);
if (error != 0)
{
Serial.print(F("Error: "));
Serial.println(error);
}
// 6. Set Application Session Key
error = LoRaWAN.setAppSessionKey(APP_SESSION_KEY);
if (error != 0)
{
Serial.print(F("Error: "));
Serial.println(error);
}
// 7. Set retransmissions for uplink confirmed packet
error = LoRaWAN.setRetries((uint8_t)7);
if (error != 0)
{
Serial.print(F("Error: "));
Serial.println(error);
}
error = LoRaWAN.getRetries();
if (error != 0)
{
Serial.print(F("Error: "));
Serial.println(error);
}
// 8. Set application key
error = LoRaWAN.setAppKey(APP_KEY);
if (error != 0)
{
Serial.print(F("Error: "));
Serial.println(error);
}
// 9. Channel configuration. (Recomemnded)
// Consult your Network Operator and Backend Provider

// Set channel 3 -> 867.1 MHz
// Set channel 4 -> 867.3 MHz
// Set channel 5 -> 867.5 MHz
// Set channel 6 -> 867.7 MHz
// Set channel 7 -> 867.9 MHz

uint32_t freq = 867100000;

for (uint8_t ch = 3; ch <= 7; ch++)
{
error |= LoRaWAN.setChannelFreq(ch, freq);
freq += 200000;
}
if (error != 0)
{
Serial.print(F("Error: "));
Serial.println(error);
}
// 10. Set Duty Cycle for specific channel. (Recomemnded)
// Consult your Network Operator and Backend Provider
for (uint8_t ch = 0; ch <= 2; ch++)
{
error |= LoRaWAN.setChannelDutyCycle(ch, 33333);
}

for (int ch = 3; ch <= 7; ch++)
{
error |= LoRaWAN.setChannelDutyCycle(ch, 40000);
}

if (error != 0)
{
Serial.print(F("Error: "));
Serial.println(error);
}
// 11. Set Data Range for specific channel. (Recomemnded)
// Consult your Network Operator and Backend Provider
for (uint8_t ch = 0; ch <= 7; ch++)
error |= LoRaWAN.setChannelDRRange(ch, 0, 5);
if (error != 0)
{
Serial.print(F("Error: "));
Serial.println(error);
}
// 12. Set Data rate range for specific channel. (Recomemnded)
// Consult your Network Operator and Backend Provider
for (uint8_t ch = 0; ch <= 7; ch++)
error |= LoRaWAN.setChannelStatus(ch, (char *)"on");

if (error != 0)
{
Serial.print(F("Error: "));
Serial.println(error);
}

// 13. Save configuration
error = LoRaWAN.saveConfig();
if (error != 0)
{
Serial.print(F("Error: "));
Serial.println(error);
}
//------------------------------------
//Now the LoRaWAN module is ready for
//joining networks and send messages.
//Please check the next examples...
//------------------------------------
Serial.end();
}

void loop()
{
// do nothing
}

sys get ver
sys factoryRESET
mac set deveui 0102030405060708
mac get deveui
Error: 1
mac set devaddr 05060708
Error: 1
mac get devaddr
Error: 1
mac set nwkskey 01020304050607080910111213141516
Error: 1
mac set appskey 000102030405060708090A0B0C0D0E0F
Error: 1
mac set retx 7
Error: 2
mac get retx
mac set appkey 000102030405060708090A0B0C0D0E0F
mac set ch freq 3 867100000
mac set ch freq 4 867300000
mac set ch freq 5 867500000
mac set ch freq 6 867700000
mac set ch freq 7 867900000
mac set ch dcycle 0 33333
mac set ch dcycle 1 33333
mac set ch dcycle 2 33333
mac set ch dcycle 3 40000
mac set ch dcycle 4 40000
mac set ch dcycle 5 40000
mac set ch dcycle 6 40000
mac set ch dcycle 7 40000
mac set ch drrange 0 0 5
mac set ch drrange 1 0 5
mac set ch drrange 2 0 5
mac set ch drrange 3 0 5
mac set ch drrange 4 0 5
mac set ch drrange 5 0 5
mac set ch drrange 6 0 5
mac set ch drrange 7 0 5
mac set ch status 0 on
mac set ch status 1 on
mac set ch status 2 on
mac set ch status 3 on
mac set ch status 4 on
mac set ch status 5 on
mac set ch status 6 on
mac set ch status 7 on
mac save

Author:	IoTLabs [ Tue Jan 16, 2018 10:24 am ]
Post subject:	Arduino y Multiprotocol Radio Shield
Buenos días, Me han surgido unos problemas con la placa multiprotocol y su conectividad y me gustaría que me ayudaran. A continuación detallo mi problema: El principal problema es que no consigo configurar el módulo de LoRaWAN con el código de ejemplo ligeramente modificado (simplemente hay Serial.print para debug), adjunto. Code: /* * ------ LoRaWAN Code Example -------- * * Explanation: This example shows how to configure the module * and all general settings related to back-end registration * process. * * Copyright (C) 2015 Libelium Comunicaciones Distribuidas S.L. * http://www.libelium.com * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see <http://www.gnu.org/licenses/>. * * Version: 1.3 * Design: David Gascon * Implementation: Luismi Marti * Ported to Arduino: Ruben Martin / #include <Wire.h> // Cooking API libraries #include <arduinoUART.h> #include <arduinoUtils.h> // LoRaWAN library #include <arduinoLoRaWAN.h> ////////////////////////////////////////////// uint8_t socket = SOCKET1; ////////////////////////////////////////////// // Device parameters for Back-End registration //////////////////////////////////////////////////////////// char DEVICE_EUI[] = "0102030405060708"; char DEVICE_ADDR[] = "05060708"; char NWK_SESSION_KEY[] = "01020304050607080910111213141516"; char APP_SESSION_KEY[] = "000102030405060708090A0B0C0D0E0F"; char APP_KEY[] = "000102030405060708090A0B0C0D0E0F"; //////////////////////////////////////////////////////////// // variable uint8_t error; void setup() { Serial.begin(57600); // 1. switch on error = LoRaWAN.ON(socket); if (error != 0) { Serial.print(F("Error: ")); Serial.println(error); } // 2. Reset to factory default values error = LoRaWAN.factoryReset(); if (error != 0) { Serial.print(F("Error: ")); Serial.println(error); } // 3. Set/Get Device EUI error = LoRaWAN.setDeviceEUI(DEVICE_EUI); if (error != 0) { Serial.print(F("Error: ")); Serial.println(error); } error = LoRaWAN.getDeviceEUI(); if (error != 0) { Serial.print(F("Error: ")); Serial.println(error); } // 4. Set/Get Device Address error = LoRaWAN.setDeviceAddr(DEVICE_ADDR); if (error != 0) { Serial.print(F("Error: ")); Serial.println(error); } error = LoRaWAN.getDeviceAddr(); if (error != 0) { Serial.print(F("Error: ")); Serial.println(error); } // 5. Set Network Session Key error = LoRaWAN.setNwkSessionKey(NWK_SESSION_KEY); if (error != 0) { Serial.print(F("Error: ")); Serial.println(error); } // 6. Set Application Session Key error = LoRaWAN.setAppSessionKey(APP_SESSION_KEY); if (error != 0) { Serial.print(F("Error: ")); Serial.println(error); } // 7. Set retransmissions for uplink confirmed packet error = LoRaWAN.setRetries((uint8_t)7); if (error != 0) { Serial.print(F("Error: ")); Serial.println(error); } error = LoRaWAN.getRetries(); if (error != 0) { Serial.print(F("Error: ")); Serial.println(error); } // 8. Set application key error = LoRaWAN.setAppKey(APP_KEY); if (error != 0) { Serial.print(F("Error: ")); Serial.println(error); } // 9. Channel configuration. (Recomemnded) // Consult your Network Operator and Backend Provider // Set channel 3 -> 867.1 MHz // Set channel 4 -> 867.3 MHz // Set channel 5 -> 867.5 MHz // Set channel 6 -> 867.7 MHz // Set channel 7 -> 867.9 MHz uint32_t freq = 867100000; for (uint8_t ch = 3; ch <= 7; ch++) { error \|= LoRaWAN.setChannelFreq(ch, freq); freq += 200000; } if (error != 0) { Serial.print(F("Error: ")); Serial.println(error); } // 10. Set Duty Cycle for specific channel. (Recomemnded) // Consult your Network Operator and Backend Provider for (uint8_t ch = 0; ch <= 2; ch++) { error \|= LoRaWAN.setChannelDutyCycle(ch, 33333); } for (int ch = 3; ch <= 7; ch++) { error \|= LoRaWAN.setChannelDutyCycle(ch, 40000); } if (error != 0) { Serial.print(F("Error: ")); Serial.println(error); } // 11. Set Data Range for specific channel. (Recomemnded) // Consult your Network Operator and Backend Provider for (uint8_t ch = 0; ch <= 7; ch++) error \|= LoRaWAN.setChannelDRRange(ch, 0, 5); if (error != 0) { Serial.print(F("Error: ")); Serial.println(error); } // 12. Set Data rate range for specific channel. (Recomemnded) // Consult your Network Operator and Backend Provider for (uint8_t ch = 0; ch <= 7; ch++) error \|= LoRaWAN.setChannelStatus(ch, (char )"on"); if (error != 0) { Serial.print(F("Error: ")); Serial.println(error); } // 13. Save configuration error = LoRaWAN.saveConfig(); if (error != 0) { Serial.print(F("Error: ")); Serial.println(error); } //------------------------------------ //Now the LoRaWAN module is ready for //joining networks and send messages. //Please check the next examples... //------------------------------------ Serial.end(); } void loop() { // do nothing } Estoy empleando el IDE Visual Studio Code, para subir el código al arduino empleo el plugin/IDE PlatformIO. Consigue subirlo y me muestra la siguiente salida, adjunto: Code: sys get ver sys factoryRESET mac set deveui 0102030405060708 mac get deveui Error: 1 mac set devaddr 05060708 Error: 1 mac get devaddr Error: 1 mac set nwkskey 01020304050607080910111213141516 Error: 1 mac set appskey 000102030405060708090A0B0C0D0E0F Error: 1 mac set retx 7 Error: 2 mac get retx mac set appkey 000102030405060708090A0B0C0D0E0F mac set ch freq 3 867100000 mac set ch freq 4 867300000 mac set ch freq 5 867500000 mac set ch freq 6 867700000 mac set ch freq 7 867900000 mac set ch dcycle 0 33333 mac set ch dcycle 1 33333 mac set ch dcycle 2 33333 mac set ch dcycle 3 40000 mac set ch dcycle 4 40000 mac set ch dcycle 5 40000 mac set ch dcycle 6 40000 mac set ch dcycle 7 40000 mac set ch drrange 0 0 5 mac set ch drrange 1 0 5 mac set ch drrange 2 0 5 mac set ch drrange 3 0 5 mac set ch drrange 4 0 5 mac set ch drrange 5 0 5 mac set ch drrange 6 0 5 mac set ch drrange 7 0 5 mac set ch status 0 on mac set ch status 1 on mac set ch status 2 on mac set ch status 3 on mac set ch status 4 on mac set ch status 5 on mac set ch status 6 on mac set ch status 7 on mac save El socket empleado es el 1, adjunto link a imagen: https://imageshack.com/a/img924/9213/nqpQ5D.jpg Si necesitan cualquier otra información la subiré sin problemas. Muchas gracias, Aaron.

Author:	libelium-dev [ Wed Jan 17, 2018 8:12 am ]
Post subject:	Re: Arduino y Multiprotocol Radio Shield
Buenos días IoTLabs, En primer lugar te aconsejo que utilices el IDE de Arduino, nosotros no hemos probado la compatibilidad con IDE Visual Studio Code y no podemos asegurar su funcionamiento. Una vez manejes el módulo con el IDE de Arduino, podrás hacer pruebas con otros IDEs pero para comprobar que todo funciona perfectamente necesitamos que utilices el mismo IDE que nosotros. Por otra parte, nos gustaría ver el output con los códigos sin modificar para ver si el módulo funciona perfectamente. Estás utiliznado Windows o Linux? Gracias. Saludos.

Author:	IoTLabs [ Wed Jan 17, 2018 9:31 am ]
Post subject:	Re: Arduino y Multiprotocol Radio Shield
Buenos días libelium-dev, Nosotros empleamos windows. He puesto el código sin modificar y el resultado es el siguiente: Code: sys get ver mac set deveui xxxxxxxxxxxxxxxx mac set devaddr xxxxxxxx mac set nwkskey xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx mac set appskey xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx mac save mac get deveui mac get devaddr sys get ver mac join abp sys get ver mac join abp sys get ver mac join abp sys get ver mac join abp sys get ver mac join abp sys get ver mac join abp sys get ver mac join abp sys get ver mac join abp sys get ver mac join abp sys get ver mac join abp Además el Led se enciende varias veces. El dispositivo está insertado en el socket 0. Gracias, Aaron.

Author:	libelium-dev [ Thu Jan 18, 2018 8:38 am ]
Post subject:	Re: Arduino y Multiprotocol Radio Shield
Hola IoTLabs, Los ejemplos están por defecto para trabajar en el Socket1, utiliza este socket para ver la respuesta. Una vez cambiado el módulo de socket, mínimo tienes que ver que el módulo te responde la versión del módulo. Una vez comprobado esto, contra qué backend estás intentando hacer trabajar el módulo? Gracias. Saludos.

Cooking Hacks Forum https://www.cooking-hacks.com/forum/

Arduino y Multiprotocol Radio Shield https://www.cooking-hacks.com/forum/viewtopic.php?f=34&t=11760	Page 1 of 1

Page 1 of 1	All times are UTC + 1 hour
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/