Cooking Hacks Forum
https://www.cooking-hacks.com/forum/

arduino uno with sx1272 lora module and waspmote usb gateway
https://www.cooking-hacks.com/forum/viewtopic.php?f=20&t=18982
Page 1 of 1

Author:  naveen4390 [ Wed Apr 10, 2019 11:48 pm ]
Post subject:  arduino uno with sx1272 lora module and waspmote usb gateway

Dear Sir,

I used the following components at the transmitter:

Hardware: Arduino Uno+cooking hacks shield + sx1272 Lora module
Software: Arduino IDE


At Reciever:
Hardware: Waspmote Usb gateway + sx1272 Lora modules
Software: Waspmote Pro IDE

the Usb gateway output is displayed always as a Received packet, state-1.

what should I do to modify the program to get proper information at the receiver.

Author:  libelium-dev [ Mon Apr 15, 2019 8:41 am ]
Post subject:  Re: arduino uno with sx1272 lora module and waspmote usb gat

Hi,

It isn't possible to modify the program of the gateway. Did you try to upload any code to the gateway? If so you will need to recover the gateway.

You can find the lora gateway information in the following link
http://www.libelium.com/development/was ... -tutorial/

Regards

Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/