My Cart

EL Wire Male/Female Set (30cm)

0.9 €0.90

Availability: On Demand

Introduction

This product includes a pair in-line power wire connectors. If you have a project where you'd like to be able to detach the wiring, this wire will fit the bill. Its a JST 2.5mm 'free hanging' cable assembly that latches strongly.
This is the matching connector to the inverter. It is required to connect EL wire to the inverter! 0.1" (2.54mm) pitch connector on the end.
Warnings: If you're using this for DC power or signal, please triple-check the polarity before plugging it in!
Specification
  • 0.1" (2.54mm) pitch connectors
  • Used with all sizes of EL wire and Inverters
  • One Male Connector
  • One Female Connector
  • Can be attached to any of our Wires and Inverters
  • Length of wire: 30cm(12")
Shipping List
  • in-line power wire connector (2 units)
Qty:
Add to Compare

Description

Introduction

This product includes a pair in-line power wire connectors. If you have a project where you'd like to be able to detach the wiring, this wire will fit the bill. Its a JST 2.5mm 'free hanging' cable assembly that latches strongly.
This is the matching connector to the inverter. It is required to connect EL wire to the inverter! 0.1" (2.54mm) pitch connector on the end.
Warnings: If you're using this for DC power or signal, please triple-check the polarity before plugging it in!
Specification
  • 0.1" (2.54mm) pitch connectors
  • Used with all sizes of EL wire and Inverters
  • One Male Connector
  • One Female Connector
  • Can be attached to any of our Wires and Inverters
  • Length of wire: 30cm(12")
Shipping List
  • in-line power wire connector (2 units)

If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.

Know more at:

Get the Starter Kits at: